TSMP77000TT

End of Life May-2023 - Alternative Device: TSMP95000 TSMP77000 www.vishay.com Vishay Semiconductors IR Sensor Module for Remote Control Systems FEATURES • Photo detector and preamplifier in one package • AC coupled response from 20 kHz to 60 kHz, all data formats • Improved shielding against electrical field disturbance • TTL and CMOS compatibility • Output active low • Supply voltage 2.5 V to 5.5 V, typically the device works in the range between 2.0 V and 5.5 V • Carrier out signal for code learning functions • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 20953 LINKS TO ADDITIONAL RESOURCES MECHANICAL DATA 3D 3D Product Page 3D Models Pinning: Calculators 1, 4 = GND, 2 = VS, 3 = carrier OUT Marking DESCRIPTION ORDERING CODE The TSMP77000 is a two lens miniaturized sensor for receiving various kinds of modulated IR signals. Two PIN diodes and a preamplifier are assembled on a lead frame, the epoxy package is designed as an IR filter. The modulated output signal, carrier out, can be used for code learning applications. Taping: TSMP77000TT - top view taped, 2200 pcs/reel TSMP77000TR - side view taped, 2300 pcs/reel BLOCK DIAGRAM This component has not been qualified according to automotive specifications. 2 VS 3 Carrier out TIA Amp Signal shaping 1, 4 GND 19746-3 APPLICATION CIRCUIT 19750-2 V Circuit S Transmitter TSMPxxxx with C1 = TSALxxxx 4.7 µF OUT GND R1 = 100 Ω R2 = 4.7 kΩ + VS µC VO GND R1 + C1 recommended to suppress power supply disturbances. R2 recommended to get faster slopes and a correct high level of the output pulses. Rev. 2.4, 12-Oct-2022 1 Document Number: 82478 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 End of Life May-2023 - Alternative Device: TSMP95000 TSMP77000 www.vishay.com Vishay Semiconductors PARTS TABLE Carrier frequency 20 kHz to 60 kHz TSMP77000 Package Heimdall Pinning 1, 4 = GND, 2 = VS, 3 = carrier OUT Dimensions (mm) 6.8 W x 3.0 H x 3.2 D Mounting SMD Application Code learning • Extended temperature range: www.vishay.com/doc?82738 • Narrow optical filter: www.vishay.com/doc?81590 • Wide optical flter: www.vishay.com/doc?82726 Special options ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER SYMBOL VALUE UNIT Supply voltage (pin 2) TEST CONDITION VS -0.3 to +6 V Output voltage (pin 3) VO -0.3 to (VS + 0.3) V Output current (pin 3) IO 5 mA Junction temperature Tj 100 °C Storage temperature range Tstg -25 to +85 °C Operating temperature range Tamb -25 to +85 °C Note • Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect the device reliability ELECTRICAL AND OPTICAL CHARACTERISTICS CARRIER OUT (Tamb = 25 °C, unless otherwise specified, VS = 3 V) PARAMETER Supply current (pin 2) TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Ev = 0 ISD 0.55 0.7 0.9 mA VS 2.5 - 5.5 V d - 1.8 - m Supply voltage Ev = 0, test signal see Fig. 1, IR diode TSAL6200, IF = 50 mA Transmission distance IOSL = 0.5 mA, test signal see Fig. 1 VOSL - - 250 mV Minimum irradiance Output voltage low (pin 3) VS = 3 V, (20 kHz to 60 kHz) Ee min. - 12 25 mW/m2 Maximum irradiance Test signal see Fig. 1, (20 kHz to 60 kHz) Ee max. 50 80 - W/m2 Angle of half transmission distance ϕ1/2 - ± 50 - ° fC = 20 kHz to 60 kHz, Ee = 25 mW/m2 to 50 W/m2, test signal see Fig. 1, BER ≤ 2% N carrier pulses Directivity Output accuracy Input burst Input burst Input burst length length length - 1 cycle + 1 cycle counts TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) Carrier cycle (26.3 μs in case of 38 kHz) Optical burst (input signal) Delay time td Output voltage Fig. 1 - Testsignal Rev. 2.4, 12-Oct-2022 2 Document Number: 82478 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 End of Life May-2023 - Alternative Device: TSMP95000 TSMP77000 www.vishay.com Vishay Semiconductors S(λ)rel - Relative Spectral Sensitivity 1.0 0.8 0.6 0.4 0.2 0 700 800 900 1000 1100 λ - Wavelength (nm) 22102 Fig. 2 - Relative Spectral Sensitivity vs. Wavelength Axis0° Title 10° 20° 30° 2nd line Horizontal 0.9 50° 0.8 2nd line 2nd line 40° 1.0 60° 70° 0.7 80° 0.6 0.4 0.2 0 0.2 0.4 0.6 drel. - Relative Transmission Distance 21427 Fig. 3 - Horizontal Directivity Axis0° Title 10° 20° 30° 2nd line Vertical 0.9 50° 0.8 2nd line 2nd line 40° 1.0 60° 70° 0.7 80° 0.6 21428 0.4 0.2 0 0.2 0.4 0.6 drel. - Relative Transmission Distance Fig. 4 - Vertical Directivity Rev. 2.4, 12-Oct-2022 3 Document Number: 82478 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 End of Life May-2023 - Alternative Device: TSMP95000 TSMP77000 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 6.8 6.6 ± 0.1 3.2 (3.4) Mold residue Mold residue 2.5 (1.8) 1.2 ± 0.2 3 0.8 2.2 (0.635) (1) 1.27 (3 x) 0.5 ± 0.1 (4 x) technical drawings according to DIN specifications 3 x 1.27 = 3.81 Marking area 2.2 Not indicated tolerances ± 0.15 (1.65) Tool separation line (2.2) Proposed pad layout from component side (for reference only) 3 x 1.27 = 3.81 1.27 Pick and place area 1.8 (R1.3) Drawing-No.: 6.550-5297.01-4 Issue: 4; 13.09.11 0.8 22608 ASSEMBLY INSTRUCTIONS Reflow Soldering Manual Soldering • Reflow soldering must be done within 72 h while stored under a max. temperature of 30 °C, 60 % RH after opening the dry pack envelope • Use a soldering iron of 25 W or less. Adjust the temperature of the soldering iron below 300 °C • Set the furnace temperatures for pre-heating and heating in accordance with the reflow temperature profile as shown in the diagram. Exercise extreme care to keep the maximum temperature below 260 °C. The temperature shown in the profile means the temperature at the device surface. Since there is a temperature difference between the component and the circuit board, it should be verified that the temperature of the device is accurately being measured • Handle products only after the temperature has cooled off • Finish soldering within 3 s • Handling after reflow should be done only after the work surface has been cooled off Rev. 2.4, 12-Oct-2022 4 Document Number: 82478 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 End of Life May-2023 - Alternative Device: TSMP95000 TSMP77000 www.vishay.com Vishay Semiconductors VISHAY LEAD (Pb)-FREE REFLOW SOLDER PROFILE Axis Title 10000 300 255 °C 240 °C 250 245 °C 217 °C 200 1000 max. 20 s 1st line 2nd line 2nd line Temperature (°C) max. 260 °C 150 max. 120 s max. 100 s 100 100 Max. ramp up 3 °C/s 50 Max. ramp down 6 °C/s Max. 2 cycles allowed 0 0 50 100 150 200 250 10 300 Time (s) 19800 0.3 3.6 TAPING VERSION TSMP..TR DIMENSIONS in millimeters 16 7.5 1.75 1.34 ref. Ø 1.5 4 Direction of feed 8 2 Ø 1.5 min. technical drawings according to DIN specifications Drawing-No.: 9.700-5337.01-4 Issue: 2; 06.10.15 Rev. 2.4, 12-Oct-2022 5 Document Number: 82478 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 End of Life May-2023 - Alternative Device: TSMP95000 TSMP77000 www.vishay.com Vishay Semiconductors 3.65 0.3 TAPING VERSION TSMP..TT DIMENSIONS in millimeters 16 1.75 7.5 Ø 1.5 4 8 Direction of feed 2 Ø 1.5 technical drawings according to DIN specifications Drawing-No.: 9.700-5338.01-4 Issue: 4; 12.06.13 Rev. 2.4, 12-Oct-2022 6 Document Number: 82478 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 End of Life May-2023 - Alternative Device: TSMP95000 TSMP77000 www.vishay.com Vishay Semiconductors REEL DIMENSIONS in millimeters 16734 LEADER AND TRAILER DIMENSIONS in millimeters Trailer no devices Leader devices no devices End Start min. 200 min. 400 96 11818 COVER TAPE PEEL STRENGTH According to DIN EN 60286-3 0.1 N to 1.3 N 300 mm/min. ± 10 mm/min. 165° to 180° peel angle Rev. 2.4, 12-Oct-2022 7 Document Number: 82478 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 End of Life May-2023 - Alternative Device: TSMP95000 TSMP77000 www.vishay.com Vishay Semiconductors OUTER PACKAGING The sealed reel is packed into a pizza box. CARTON BOX DIMENSIONS in millimeters Length Thickness Width 22127 Pizza box (SMD and heimdall) (taping in reels) THICKNESS WIDTH LENGTH 50 340 340 LABEL Standard bar code labels for finished goods The standard bar code labels are product labels and used for identification of goods. The finished goods are packed in final packing area. The standard packing units are labeled with standard bar code labels before transported as finished goods to warehouses. The labels are on each packing unit and contain Vishay Semiconductor GmbH specific data. VISHAY SEMICONDUCTOR GmbH STANDARD BAR CODE PRODUCT LABEL (finished goods) PLAIN WRITTING Item-description Item-number Selection-code ABBREVIATION LENGTH - 18 INO 8 SEL 3 BATCH 10 Data-code COD 3 (YWW) Plant-code PTC 2 Quantity QTY 8 Accepted by ACC - Packed by PCK - MIXED CODE - xxxxxxx+ Company logo TYPE LENGTH LOT-/serial-number Mixed code indicator Origin LONG BAR CODE TOP Item-number N 8 Plant-code N 2 Sequence-number X 3 Quantity N 8 Total length - 21 SHORT BAR CODE BOTTOM TYPE LENGTH Selection-code X 3 Data-code N 3 Batch-number X 10 Filter - 1 Total length - 17 Rev. 2.4, 12-Oct-2022 8 Document Number: 82478 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 End of Life May-2023 - Alternative Device: TSMP95000 TSMP77000 www.vishay.com Vishay Semiconductors DRY PACKING ESD PRECAUTION The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. Proper storage and handling procedures should be followed to prevent ESD damage to the devices especially when they are removed from the antistatic shielding bag. Electrostatic sensitive devices warning labels are on the packaging. Aluminum bag VISHAY SEMICONDUCTORS STANDARD BAR CODE LABELS Label The Vishay Semiconductors standard bar code labels are printed at final packing areas. The labels are on each packing unit and contain Vishay Semiconductors specific data. Reel 15973 FINAL PACKING The sealed reel is packed into a cardboard box. RECOMMENDED METHOD OF STORAGE Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: 22178 • Storage temperature 10 °C to 30 °C • Storage humidity ≤ 60 % RH max. After more than 72 h under these conditions moisture content will be too high for reflow soldering. In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air / nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 125 °C + 5 °C not suitable for reel or tubes. An EIA JEDEC® standard J-STD-020 level 4 label is included on all dry bags. CAUTION This bag contains MOISTURE-SENSITIVE DEVICES LEVEL 4 1. Shelf life in sealed bag: 12 months at < 40 °C and < 90 % relative humidity (RH) 2. After this bag is opened, devices that will be subjected to soldering reflow or equivalent processing (peak package body temp. 260 °C) must be 2a. Mounted within 72 hours at factory condition of < 30 °C/60 % RH or 2b. Stored at < 5 % RH 3. Devices require baking befor mounting if: Humidity Indicator Card is > 10 % when read at 23 °C ± 5 °C or 2a. or 2b. are not met. 4. If baking is required, devices may be baked for: 192 hours at 40 °C + 5 °C/- 0 °C and < 5 % RH (dry air/nitrogen) or 96 hours at 60 °C ± 5 °C and < 5 % RH for all device containers or 24 hours at 125 °C ± 5 °C not suitable for reels or tubes Bag Seal Date: (If blank, see barcode label) Note: Level and body temperature defined by EIA JEDEC Standard J-STD-020 22522 EIA JEDEC standard J-STD-020 level 4 label is included on all dry bags Rev. 2.4, 12-Oct-2022 9 Document Number: 82478 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000