VCUT03B1-DD1-G-08

VCUT03B1-DD1 www.vishay.com Vishay Semiconductors Bidirectional Symmetrical (BiSy) Single Line ESD-Protection Diode in LLP1006-2M FEATURES • Ultra compact LLP1006-2M package • Low package height < 0.4 mm 2 1 • 1-line ESD protection 21129 • Working range ± 3.5 V • Low leakage current < 0.1 μA 20855 • Low load capacitance CD = 12.5 pF MARKING (example only) • ESD immunity acc. IEC 61000-4-2 ± 18 kV contact discharge ± 20 kV air discharge XY • Soldering can be checked by standard vision inspection, no X-ray necessary 21121 Bar = pin 1 marking X = date code Y = type code (see table below) • Pin plating NiPdAu (e4) no whisker growth • PATENT(S): www.vishay.com/patents • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models Models ORDERING INFORMATION DEVICE NAME ORDERING CODE TAPED UNITS PER REEL (8 mm TAPE ON 7" REEL) MINIMUM ORDER QUANTITY VCUT03B1-DD1 VCUT03B1-DD1-G-08 8000 8000 PACKAGE DATA DEVICE NAME PACKAGE NAME VCUT03B1-DD1 LLP1006-2M TYPE CODE WEIGHT MOLDING COMPOUND FLAMMABILITY RATING N 0.72 mg UL 94 V-0 MOISTURE SENSITIVITY LEVEL SOLDERING CONDITIONS MSL level 1 Peak temperature max. 260 °C (according J-STD-020) ABSOLUTE MAXIMUM RATINGS VCUT03B1-DD1 PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT Peak pulse current Acc. IEC 61000-4-5; tp = 8/20 μs; single shot IPPM 3.5 A Peak pulse power Pin 1 to pin 2 Acc. IEC 61000-4-5; tp = 8/20 μs; single shot PPP 40 W ESD immunity Operating temperature Storage temperature Contact discharge acc. IEC61000-4-2; 10 pulses Air discharge acc. IEC61000-4-2; 10 pulses Junction temperature VESD ± 18 ± 20 kV TJ -40 to +125 °C TSTG -55 to +150 °C PATENT(S): www.vishay.com/patents This Vishay product is protected by one or more United States and international patents. Rev. 2.4, 19-Nov-2021 Document Number: 81148 1 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VCUT03B1-DD1 www.vishay.com Vishay Semiconductors CUT THE SPIKES WITH VCUT03B1-DD1 The VCUT03B1-DD1 is a bidirectional and symmetrical (BiSy) ESD protection device which clamps positive and negative overvoltage transients to ground. Connected between the signal or data line and the ground the VCUT03B1-DD1 offers a high isolation (low leakage current, low capacitance) within the specified working range. Due to the short leads and small package size of the tiny LLP1006-2M package the line inductance is very low, so that fast transients like an ESD strike can be clamped with minimal over- or undershoots. ELECTRICAL CHARACTERISTICS VCUT03B1-DD1 (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT Number of lines which can be protected Nchannel - - 1 lines Max. reverse working voltage VRWM - - 3.5 V Reverse voltage At IR = 0.1 μA VR 3.5 - - V Reverse current At V = 3.5 V IR - 0.1 μA Reverse breakdown voltage At I =1 mA VBR 5.8 6.7 7.5 V Protection paths Reverse stand-off voltage Reverse clamping voltage Capacitance At IPP = 1 A VC - 7.8 9 V At IPP = IPPM = 3.5 A VC - 9.5 11.5 V At V = 0 V; f = 1 MHz CD - 12.5 15 pF At V = 2.5 V; f = 1 MHz CD - 11.5 - pF TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) Axis Title Axis Title 120 10000 10000 100 Rise time = 0.7 ns to 1 ns 8 µs to 100 % 100 80 1000 40 60 1st line 2nd line 53 2nd line IPPM (%) 60 2nd line 1000 1st line 2nd line 2nd line IESD (%) 80 20 µs to 50 % 40 100 27 100 20 20 0 0 10 -10 0 20557 t (ns) 2nd line Fig. 1 - ESD Discharge Current Wave Form acc. IEC 61000-4-2 (330 Ω/150 pF) Rev. 2.4, 19-Nov-2021 10 0 10 20 30 40 50 60 70 80 90 100 20548 10 20 30 40 t (µs) 2nd line Fig. 2 - 8/20 μs Peak Pulse Current Wave Form acc. IEC 61000-4-5 Document Number: 81148 2 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VCUT03B1-DD1 www.vishay.com Vishay Semiconductors 70 14 50 10 40 VC-ESD (V) 12 8 CD (pF) Acc. IEC 61000-4-2 ± 8 kV contact discharge 60 f = 1 MHz 6 30 20 10 0 4 -10 2 -20 -30 0 0 1 2 3 21787 4 5 VR (V) Fig. 6 - Typical Peak Clamping Voltage VC vs. Peak Pulse Current IPP 160 7 140 6 120 VC-ESD (V) 8 5 4 3 80 VC-ESD 60 40 1 20 0 1 101 102 103 104 0 105 21791 IR (µA) 21788 Acc. IEC 61000-4-2 contact discharge 100 2 0 10-2 10-1 t (ns) 21790 Fig. 3 - Typical Capacitance CD vs. Reverse Voltage VR VR (V) -10 0 10 20 30 40 50 60 70 80 90 6 Fig. 4 - Typical Forward Current IF vs. Forward Voltage VF 5 10 15 20 25 30 VESD (kV) Fig. 7 - Typical Clamping Performance at + 8 kV Contact Discharge (acc. IEC 61000-4-2) 12 10 VC (V) 8 VC 6 4 Measured acc. IEC 61000-4-5 (8/20 µs - wave form) 2 0 0 21789 1 2 3 4 5 IPP (A) Fig. 5 - Typical Reverse Voltage VR vs. Reverse Current IR Rev. 2.4, 19-Nov-2021 Document Number: 81148 3 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VCUT03B1-DD1 www.vishay.com Vishay Semiconductors 0.25 [0.010] 0.15 [0.006] PACKAGE DIMENSIONS in millimeters (inches): LLP1006-2M 0.65 [0.026] 0.55 [0.022] Orientation identification 0.05 [0.002] 0 [0.000] 0.4 [0.016] 0.33 [0.013] 0.45 [0.018] 0.35 [0.014] 0.125 [0.005] ref. 0.55 [0.022] 0.45 [0.018] 0.3 [0.012] 0.2 [0.008] 1.05 [0.041] 0.95 [0.037] 1 [0.039] Solder resist mask 0.2 [0.008] 0.5 [0.020] 0.6 [0.024] Foot print recommendation: Solder pad 0.5 [0.020] 0.05 [0.002] 0.25 [0.010] Pad Design Patented: ( P US 9.018.537 B2) Document no.: S8-V-3906.04-005 (4) Rev. 7 - Date: 11.May 2016 20812 Unreeling direction LLP1006-2X Orientation identification Top view S8-V-3906.04-017 (4) 02.05.2017 22965 Rev. 2.4, 19-Nov-2021 Pad layout - view from top seen at bottom side Document Number: 81148 4 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000