Not for New Designs - Alternative Device: VCUT05G1-SD0
VCUT05E1-SD0
www.vishay.com
Vishay Semiconductors
Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode
in Silicon Package
FEATURES
• Ultra compact CLP0603 package
• Low package height < 0.3 mm
0.27
• 1-line ESD protection
• Working range ± 5.5 V
• Low leakage current < 0.1 μA
22543
0.6
0.3
MARKING (example only)
1
• Low load capacitance CD < 14 pF
• ESD immunity acc. IEC 61000-4-2
± 30 kV contact discharge
± 30 kV air discharge
22544
• Lead plating: Au (e4)
XY
• Lead material: Ni
• Topside coating
• e4 - precious metal (e.g. Ag, Au, NiPd, NiPdAu) (no Sn)
22545
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
1 = year code
Open circle = month code and pin 1
XY = type code
DESIGN SUPPORT TOOLS AVAILABLE
3D 3D
3D Models
ORDERING INFORMATION
ENVIRONMENTAL AND QUALITY CODE
PART NUMBER
(EXAMPLE)
RoHS-COMPLIANT +
LEAD (Pb)-FREE TERMINATIONS
GOLD PLATED
15K PER 7" REEL
(8 mm TAPE)
15K/BOX = MOQ
ORDERING CODE
(EXAMPLE)
4
-08
VCUT05E1-SD0-G4-08
GREEN
VCUT05E1-SD0-
PACKAGING CODE
G
PACKAGE DATA
DEVICE NAME
PACKAGE NAME
TYPE CODE
WEIGHT
SOLDERING CONDITIONS
VCUT05E1-SD0
CLP0603-2L
5D
0.12 mg
Peak temperature max. 260 °C
Reflow soldering according JEDEC® STD-020
ABSOLUTE MAXIMUM RATINGS
PARAMETER
TEST CONDITIONS
SYMBOL
VALUE
UNIT
Peak pulse current
acc. IEC 61000-4-5, 8/20 μs/single shot
IPPM
6
A
Peak pulse power
Pin 1 to pin 2
acc. IEC 61000-4-5; tp = 8/20 μs; single shot
PPP
78
W
ESD immunity
Operating temperature
Storage temperature
Rev. 1.6, 27-Oct-2021
Contact discharge acc. IEC 61000-4-2; 10 pulses
Air discharge acc. IEC 61000-4-2; 10 pulses
Junction temperature
VESD
± 30
± 30
kV
TJ
-55 to +150
°C
Tstg
-55 to +150
°C
Document Number: 85900
1
For technical questions, contact: ESDprotection@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not for New Designs - Alternative Device: VCUT05G1-SD0
VCUT05E1-SD0
www.vishay.com
Vishay Semiconductors
CUT THE SPIKES WITH VCUT05E1-SD0
The VCUT05E1-SD0 is a Bidirectional and Symmetrical (BiSy) ESD protection device which clamps positive and negative
overvoltage transients to ground. Connected between the signal or data line and the ground the VCUT05E1-SD0 offers a high
isolation (low leakage current, low capacitance) within the specified working range. Due to the short leads and small package
size of the tiny CLP0603 package the line inductance is very low, so that fast transients like and ESD strike can be clamped with
minimal over- or undershoots.
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITIONS/REMARKS
SYMBOL
MIN.
TYP.
Number of lines which can be protected
Nchannel
-
Max. reverse working voltage
VRWM
-
Reverse voltage
at IR = 0.1 μA
VR
5.5
-
-
V
Reverse current
at VRWM = 5.5 V
IR
-
-
0.1
μA
at IR = 1 mA
VBR
6.5
8
9
V
Protection paths
Reverse stand-off voltage
Reverse breakdown voltage
Reverse clamping voltage
MAX.
UNIT
-
1
lines
-
5.5
V
at IPP = 1 A
VC
-
8.8
10
V
at IPP = IPPM = 6 A
VC
-
11
13
V
at VR = 0 V; f = 1 MHz
CD
-
13
14
pF
at VR = 2.5 V; f = 1 MHz
CD
-
11
-
pF
Clamping voltage
Transmission Line Pulse (TLP); tp = 100 ns
ITLP = 8 A
VC-TLP
-
9.8
-
V
Clamping voltage
Transmission Line Pulse (TLP); tp = 100 ns
ITLP = 16 A
VC-TLP
-
11
-
V
Dynamic resistance
Transmission Line Pulse (TLP); tp = 100 ns
RDYN
-
0.15
-
Ω
Capacitance
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
120 %
Rise time = 0.7 ns to 1 ns
8 µs to 100 %
100 %
80 %
80 %
60 %
60 %
IPPM
Discharge Current IESD
100 %
53 %
40 %
27 %
20 %
20 %
0%
-10 0 10 20 30 40 50 60 70 80 90 100
20557
Time (ns)
Fig. 1 - ESD Discharge Current Wave Form
acc. IEC 61000-4-2 (330 Ω/150 pF)
Rev. 1.6, 27-Oct-2021
20 µs to 50 %
40 %
0%
0
20548
10
20
30
40
Time (µs)
Fig. 2 - 8/20 μs Peak Pulse Current Wave Form
acc. IEC 61000-4-5
Document Number: 85900
2
For technical questions, contact: ESDprotection@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not for New Designs - Alternative Device: VCUT05G1-SD0
VCUT05E1-SD0
www.vishay.com
20
Vishay Semiconductors
10
f = 1 MHz
Ta = 25 °C
Ta = +150 °C
16
0
14
-5
12
10
8
6
- 15
- 20
- 25
4
- 35
2
- 40
0
1
2
3
4
5
- 45
- 10 0
6
VR (V)
22695
40
9
35
8
30
VC-ESD (V)
5
Acc. IEC 61000-4-2
+ 8 kV
contact discharge
25
Ta = -50 °C
Ta = 25 °C
Ta = 150 °C
6
t (ns)
Fig. 6 - Typical Clamping Performance at 8 kV Contact Discharge
acc. IEC 61000-4-2
10
7
10 20 30 40 50 60 70 80 90
22569
Fig. 3 - Typical Capacitance CD vs. Reverse Voltage VR
VR in V
- 10
- 30
0
4
20
15
10
3
5
2
0
1
-5
0
0.01 0.1
1
10
100 1000 10 000 100 000
IR in µA
22696
14
- 10
- 10 0
t (ns)
Fig. 7 - Typical Clamping Performance at 8 kV Contact Discharge
acc. IEC 61000-4-2
60
Ta = at 25 °C
Ta = at 150 °C
12
10 20 30 40 50 60 70 80 90
22570
Fig. 4 - Typical Reverse Voltage VR vs. Reverse Current IR
10
8
6
ITLP in A
VC in (V)
Acc. IEC 61000-4-2
- 8 kV
contact discharge
5
VC-ESD (V)
CD (pF)
18
VC
Pin 1-2 or Pin 2-1
Transmission Line Pulse (TLP)
t
50
p = 100 ns
(Average between
55 ns and 95 ns)
40 V
C-TLP = 0.15 Ω x ITLP + 8.6 V
(RDYN = 0.15 Ω)
30
20
4
10
2
Measured acc. to IEC 61000-4-5
(8/20 µs - wave form)
0
0
22697
1
2
3
4
5
6
0
IPP in (A)
Fig. 5 - Typical Peak Clamping Voltage VC vs.
Peak Pulse Current IPP
Rev. 1.6, 27-Oct-2021
0
7
22731
5
10
15
20
VC-TLP in V
Fig. 8 - Typical Clamping Voltage at 100 ns Transmission Line Pulse
(TLP)
Document Number: 85900
3
For technical questions, contact: ESDprotection@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not for New Designs - Alternative Device: VCUT05G1-SD0
VCUT05E1-SD0
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters (mils): CLP0603-2L
A2
e1
Package = chip dimensions in mm [mils]
b
D
L
A1
e
Millimeters
min.
nom.
max.
min.
nom.
max.
A
0.25
0.28
0.30
9.84
11.02
11.81
A1
0.01
0.01
0.02
0.39
0.39
0.79
A
C
A2
0.24
0.27
0.28
9.45
10.63
11.02
b
0.22
0.25
0.28
8.66
9.84
11.02
D
0.27
0.30
0.33
10.62
11.81
12.99
E
0.57
0.60
0.63
22.44
23.62
24.80
e
0.40
L
15.75
0.25
e1
E
mils
0.12
0.15
9.84
0.18
4.72
5.91
7.09
22941
2 terminal leadless package (CLP)
Document no.: S8-V-3906.04-023 (4)
Created - Date: 22. Nov. 2010
Rev.8 - Date: 11. Nov. 2016
Footprint and soldering recommendation:
please see Application Note: www.vishay.com/doc?85917
Rev. 1.6, 27-Oct-2021
Document Number: 85900
4
For technical questions, contact: ESDprotection@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not for New Designs - Alternative Device: VCUT05G1-SD0
VCUT05E1-SD0
www.vishay.com
Vishay Semiconductors
CARRIER TAPE in millimeters: CLP0603-2L
A-A
0.2 ± 0.02
max
. 2°
Ø 0.2 ± 0.05
Section
0.67±0.03
4 ± 0.1
+ 0.3
8 - 0.1
A
3.5 ± 0.05
Ø 1.55 ± 0.05
1.75 ± 0.1
2 ± 0.05
B
B
A
B-B
0.33 ± 0.03
Section
5°
0.37± 0.03
Cummulative tolerances of 10 sprocket holes is +/-0.2 mm
22591
Document no. S8-V-3906.04-0025 (4)
Created - Date: 22. Nov. 2010
ORIENTATION IN CARRIER CLP0603-2L
Unreeling direction
DETAIL A
50:1
Pin 1
A
CLP0603
Top view
Orientation in Carrier Tape (CLP0603)
S8-V-3906.04-026 (4)
22.10.2010
22936
Rev. 1.6, 27-Oct-2021
Document Number: 85900
5
For technical questions, contact: ESDprotection@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2023
1
Document Number: 91000