VEMD5010X01

VEMD5010X01 www.vishay.com Vishay Semiconductors Silicon PIN Photodiode FEATURES • Package type: surface mount • Package form: top view • Dimensions (L x W x H in mm): 5 x 4 x 0.9 • Radiant sensitive area (in mm2): 7.5 • AEC-Q101 qualified • High photo sensitivity • High radiant sensitivity • Suitable for visible and near infrared radiation • Fast response times DESCRIPTION • Angle of half sensitivity: ϕ = ± 65° VEMD5010X01 is a high speed and high sensitive PIN photodiode. It is a low profile surface mount device (SMD) including the chip with a 7.5 mm2 sensitive area detecting visible and near infrared radiation. • Floor life: 72 h, MSL 4, according to J-STD-020 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • High speed photo detector PRODUCT SUMMARY COMPONENT Ira (μA) ϕ (deg) λ0.1 (nm) VEMD5010X01 48 ± 65 430 to 1100 Note • Test conditions see table “Basic Characteristics” ORDERING INFORMATION ORDERING CODE PACKAGING REMARKS PACKAGE FORM VEMD5010X01 Tape and reel MOQ: 1000 pcs, 1000 pcs/reel Top view VEMD5010X01-GS15 Tape and reel MOQ: 5000 pcs, 5000 pcs/reel Top view Note • MOQ: minimum order quantity ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Reverse voltage Power dissipation Tamb ≤ 25 °C Junction temperature SYMBOL VALUE VR 20 UNIT V PV 215 mW Tj 110 °C Operating temperature range Tamb -40 to +110 °C Storage temperature range Tstg -40 to +110 °C Soldering temperature Acc. reflow solder profile fig. 8 Thermal resistance junction/ambient ESD safety HBM Rev. 1.1, 21-Mar-16 ± 2000 V, 1.5 kΩ, 100 pF, 3 pulses Tsd 260 °C RthJA 350 K/W ESDHBM ≥2 kV Document Number: 84202 1 For technical questions, contact: detectortechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEMD5010X01 www.vishay.com Vishay Semiconductors BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER Forward voltage Breakdown voltage Reverse dark current Diode capacitance TEST CONDITION SYMBOL IF = 50 mA VF IR = 100 μA, E = 0 V(BR) VR = 10 V, E = 0 MIN. TYP. MAX. UNIT 1 1.3 V Iro 2 30 nA VR = 0 V, f = 1 MHz, E = 0 CD 70 20 V pF VR = 3 V, f = 1 MHz, E = 0 CD 25 Open circuit voltage Ee = 1 mW/cm2, λ = 950 nm Vo 350 mV Temperature coefficient of Vo Ee = 1 mW/cm2, λ = 950 nm TKVo -2.6 mV/K Short circuit current Ee = 1 mW/cm2, λ = 950 nm Ik 45 μA Temperature coefficient of Ik Ee = 1 mW/cm2, λ = 950 nm TKIk 0.1 %/K Ee = 1 mW/cm2, λ = 950 nm, VR = 5 V Ira Reverse light current 40 40 pF 48 μA Angle of half sensitivity ϕ ± 65 deg Wavelength of peak sensitivity λp 940 nm λ0.1 430 to 1100 nm VR = 10 V, λ = 950 nm NEP 4 x 10-14 W/√Hz Rise time VR = 10 V, RL = 1 kΩ, λ = 820 nm tr 100 ns Fall time VR = 10 V, RL = 1 kΩ, λ = 820 nm tf 100 ns Range of spectral bandwidth Noise equivalent power BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) Basic characteristics graphs to be extended to 110 °C ambient temperatures where applicable. I ra rel - Relative Reverse Light Current Iro - Reverse Dark Current (nA) 1000 100 10 VR = 10 V 1 20 94 8403 40 60 80 Tamb - Ambient Temperature (°C) VR = 5 V λ = 950 nm 1.2 1.0 0.8 0.6 100 Fig. 1 - Reverse Dark Current vs. Ambient Temperature Rev. 1.1, 21-Mar-16 1.4 0 94 8409 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 2 - Relative Reverse Light Current vs. Ambient Temperature Document Number: 84202 2 For technical questions, contact: detectortechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEMD5010X01 www.vishay.com Vishay Semiconductors S(λ)rel - Relative Spectral Sensitivity 100 10 VR = 5 V λ = 950 nm 1 0.1 0.01 0.8 0.6 0.4 0.2 0 0.1 1 10 Ee - Irradiance (mW/cm2) 12787 1.0 350 550 Fig. 3 - Reverse Light Current vs. Irradiance 750 Fig. 6 - Relative Spectral Sensitivity vs. Wavelength 0° 0.5 mW/cm 2 0.2 mW/cm 2 10 0.1 mW/cm 2 0.05 mW/cm 2 λ = 950 nm 0.1 1 10 20° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 100 VR - Reverse Voltage (V) 12788 10° 30° 1 mW/cm 2 Srel - Relative Radiant Sensitivity Ira - Reverse Light Current (µA) 100 1 1150 950 λ - Wavelength (nm) 94 8420 ϕ - Angular Displacement Ira - Reverse Light Current (µA) 1000 80° 0.6 0.4 0.2 0 94 8406 Fig. 4 - Reverse Light Current vs. Reverse Voltage Fig. 7 - Relative Radiant Sensitivity vs. Angular Displacement CD - Diode Capacitance (pF) 80 E=0 f = 1 MHz 60 40 20 0 0.1 948407 1 10 100 VR - Reverse Voltage (V) Fig. 5 - Diode Capacitance vs. Reverse Voltage Rev. 1.1, 21-Mar-16 Document Number: 84202 3 For technical questions, contact: detectortechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEMD5010X01 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 4 Bottom view 2.1 1.8 3 5 1.8 0.2 0.1 3 0.9 ± 0.15 Optical center Optical window Top view C (20 : 1) C Tie bar, electrically connected to cathode 2 Recommended footprint 0.65 1.2 4.1 1 0.6 Cathode 0.9 1.2 0.8 1 5.2 2.5 Exposed pad (cathode) 3.1 NC 1 0.8 0.4 (4 x) Center of device 0.8 2 Anode 0.6 (4 x) Drawing- No.: 6.550-5329.01-4 Issue: 2; 03.03.2016 Rev. 1.1, 21-Mar-16 Not indicated tolerances ± 0.1 Technical drawings according to DIN specification Document Number: 84202 4 For technical questions, contact: detectortechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEMD5010X01 www.vishay.com Vishay Semiconductors TAPE AND REEL DIMENSIONS in millimeters Reel-design is reperesentative for different types Unreel direction X Label posted here Ø 1.55 B-B ( 2 : 1 ) 0.3 B Ø 1.5 8 2 X Anode 1.75 B Drawing-No.: 9.800-5129.01-4; Issue: 1; 20.07.2015 Rev. 1.1, 21-Mar-16 1.42 5.5 Document Number: 84202 5 For technical questions, contact: detectortechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEMD5010X01 www.vishay.com Vishay Semiconductors SOLDER PROFILE DRYPACK 300 Temperature (°C) max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 200 max. 30 s 150 max. 100 s max. 120 s 100 max. ramp down 6 °C/s 50 0 19841 50 100 150 200 250 Time (s) Fig. 8 - Lead (Pb)-free Reflow Solder Profile acc. J-STD-020D Rev. 1.1, 21-Mar-16 FLOOR LIFE Time between soldering and removing from MBB must not exceed the time indicated in J-STD-020: Moisture sensitivity: Level 4 Floor life: 72 h Conditions: Tamb < 30 °C, RH < 60 % DRYING max. ramp up 3 °C/s 0 Devices are packed in moisture barrier bags (MBB) to prevent the products from moisture absorption during transportation and storage. Each bag contains a desiccant. 300 In case of moisture absorption devices should be baked before soldering. Conditions see J-STD-020 or recommended conditions: 192 h at 40 °C (+ 5 °C), RH < 5 % or 96 h at 60 °C (+ 5 °C), RH < 5 %. Document Number: 84202 6 For technical questions, contact: detectortechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000