150353RS74500

Dimensions: [mm] Recommended Land Pattern: [mm] Absolute Maximum Ratings (Ambient Temperature 25°C): Properties 3,25 ±0,15 4,0 3,25 0,48 1,30 1,3 ±0,15 0,50 3,25 2 IF Peak W mA IF 700 mA VREV 5 V ESD Threshold/ Human Body Model VESD HBM 8000 V Absolute Thermal Resistance Junction to Solder Point RθJS 10 K/W TJ 125 °C 0,77 ±0,15 duty/ 10 @ 1 kHz Optical Properties: Scale - 8:1 2,1 ±0,15 O 2,6 ±0,15 Unit 1000 Junction Temperature Thermal pad 3,4 ±0,15 Peak Forward Current Value 2.1 Reverse Voltage 1 0,48 ±0,15 PDiss Continuous Forward Current 3,25 ±0,15 2 1 Test conditions Power Dissipation Chip Technology AlInGaP Emitting Color Schematic: Red Lens Type Dome Lens Waterclear General Information: Operating Temperature -40 up to +125 °C Moisture Sensitivity Level (MSL) 3,4 ±0,15 2 1 1 2 + 2 Protection device Polarity Mark (Cathode) Scale - 8:1 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 003.000 2021-11-04 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SMDC SMT Mono-color Ceramic LED Waterclear ORDER CODE 150353RS74500 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3535 eiPal Valid 1/11 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Electrical & Optical Properties: Properties Test conditions Viewing Angle: Value min. typ. max. Unit Peak Wavelength λPeak 350 mA Dominant Wavelength λDom 350 mA Luminous Flux ΦV 350 mA Forward Voltage VF 350 mA Δλ 350 mA 15 nm 2θ50% 350 mA 125 ° Spectral Bandwidth Viewing Angle Phi 0° 55 635 nm 625 nm 70 2.2 lm 3 V 0° - 62,5° Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [JEDEC JS709B] Halogen Free Conform [IEC 61249-2-21] IEC-62471 [ Exempt Group 0 ] 20° 30° 90 Relative Luminous Intensity (%) RoHS Approval Photobiological Safety 10° 100 Certification: 40° 80 45° 70 50° 60 50 60° 62,5° 40 70° 30 20 80° 10 90° -90 -45 0 10 20 30 40 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 003.000 2021-11-04 DIN ISO 2768-1m 50 60 70 80 90 100 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SMDC SMT Mono-color Ceramic LED Waterclear ORDER CODE 150353RS74500 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3535 eiPal Valid 2/11 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Spectral: Forward Current vs. Forward Voltage: 800 700 600 100 Forward Current [mA] Relative Intensity [%] 80 60 40 500 400 300 20 200 0 400 450 500 550 600 650 700 750 Wavelength [nm] 100 0 0.0 0.5 1.0 1.5 2.0 2.5 Forward Voltage [V] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 003.000 2021-11-04 DIN ISO 2768-1m 3.0 3.5 4.0 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SMDC SMT Mono-color Ceramic LED Waterclear ORDER CODE 150353RS74500 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3535 eiPal Valid 3/11 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Luminous Flux vs. Forward Current: Junction Temperature vs. Dominant Wavelength: 120 6.0 5.0 100 4.0 3.0 Relative Wavelength Change Δλd [nm] Luminous Flux [lm] 80 60 40 20 2.0 1.0 0.0 -1.0 -2.0 -3.0 -4.0 0 0 100 200 300 400 500 Forward Current [mA] 600 700 800 -10 0 10 20 30 40 50 60 70 80 Junction Temperature [C] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 003.000 2021-11-04 DIN ISO 2768-1m 90 100 110 120 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SMDC SMT Mono-color Ceramic LED Waterclear ORDER CODE 150353RS74500 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3535 eiPal Valid 4/11 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Junction Temperature vs. Forward Voltage: 140 0.15 120 0.1 100 0.05 Relative Forward Voltaged [V] Relative Luminous intensity [%] Junction Temperature vs. Luminous Intensity: 80 60 40 20 0 -0.05 -0.1 -0.15 0 -0.2 -10 0 10 20 30 40 50 60 70 80 Junction Temperature [C] 90 100 110 120 -10 0 10 20 30 40 50 60 70 80 Junction Temperature [C] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 003.000 2021-11-04 DIN ISO 2768-1m 90 100 110 120 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SMDC SMT Mono-color Ceramic LED Waterclear ORDER CODE 150353RS74500 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3535 eiPal Valid 5/11 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Derating Curve: 1 0.9 Forward Current [A] 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 25 50 75 100 Ambient Temperature [˚C] Rj-a = 40 ˚K/W Rj-a = 30 ˚K/W Rj-a = 20 ˚K/W Rj-a = 10 ˚K/W 125 150 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 003.000 2021-11-04 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SMDC SMT Mono-color Ceramic LED Waterclear ORDER CODE 150353RS74500 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3535 eiPal Valid 6/11 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape: [mm] Packaging Specification - Reel: [mm] P0 A K0 P2 W3 T E1 D0 W1 close to center B0 W E2 A N F D B C Top Cover Tape D1 A P1 A0 T2 Cathode Mark End W2 T1 Start Feeding direction Carrier Tape Cover Tape detail B B Cover Tape Chip Cavity Sprocket Hole No Component min.160mm Components No Component min.100mm Embossment Cover Tape min. 400mm packaging is reffered to the international standard IEC 60286-3:2013 tolerance size 150353xS75400 A0 B0 W typ. typ. +0,3/ -0,1 3,8 3,8 12,0 T T1 T2 K0 P0 P1 P2 D0 ref. max. typ. typ. ±0,1 ±0,1 ±0,05 +0,1/ -0,0 0,25 0,1 2,55 2,2 4,0 8,0 2,0 1,5 D1 E1 E2 F Tape Type 2a min. ±0,1 min. ±0,05 1,5 1,75 10,25 5,5 Polystyrene VPE / packaging unit pcs. 1000 165° - 180° 12 mm A ± 2,0 178,00 B min. 1,50 C min. 12,80 D min. 20,20 N min. 50,00 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 003.000 2021-11-04 DIN ISO 2768-1m W1 + 2,0 12,40 W2 max. 18,40 W3 min. 11,90 W3 max. 15,40 PROJECTION METHOD DESCRIPTION Pull-of force Tape width Tolerance Tape width 12 mm 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SMDC SMT Mono-color Ceramic LED Waterclear ORDER CODE 150353RS74500 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3535 eiPal Valid 7/11 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) max. 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL max. 60 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp max. 10 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature max. 220 seconds refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Applied cycles Volume mm³