ESD103B102ELE6327XTMA1

ESD103-B1-02EL Bi-directional ESD protection device, 15 V, 0.09 pF, 0402 Product description ESD protection device with a bi-dirctional symmetric I/V characteristic and excellent clamping performance, extremely low capacitance and high linearity for mobile device antenna. Feature list • • • • • • ESD / transient protection according to: - IEC61000-4-2 (ESD): ±14 kV (air) / ±10 kV (contact) Bi-directional maximum working voltage: VWM = ±15 V Line capacitance: CL = 0.09 pF at f = 1 GHz Clamping voltage: Vcl = 48 V at ITLP = 16 A with Rdyn = 1.8 Ω Very low leakage current: IL = 0.1 nA Small form factor SMD size, low profile (1.0 x 0.6 x 0.3 mm³) Potential applications • RF antennas and interfaces (LTE, WLAN) Product validation Qualified for industrial applications according to the relevant tests of JEDEC47/20/22. Device information Top view Pin 1 V Bottom view Pin 2 Pin 1 Pin 2 Figure 1 Pin configuration and schematic diagram Table 1 Part information Pin 1 Product name / Ordering code Package ESD103-B1-02EL / ESD103B102ELE6327XTMA1 TSLP-2-20 1 line, bi-directional Datasheet www.infineon.com Pin configuration Pin 2 Marking Pieces / Reel V Please read the sections "Important notice" and "Warnings" at the end of this document 15 k v2.0 2022-03-15 ESD103-B1-02EL Bi-directional ESD protection device, 15 V, 0.09 pF, 0402 Table of contents Table of contents Product description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Feature list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Potential applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Product validation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Device information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Typical characteristic diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 Package information TSLP-2-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 5 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Datasheet 2 v2.0 2022-03-15 ESD103-B1-02EL Bi-directional ESD protection device, 15 V, 0.09 pF, 0402 1 Absolute maximum ratings 1 Absolute maximum ratings Table 2 Absolute maximum ratings at TA = 25°C, unless otherwise specified Parameter Symbol Values Min. Unit Note or test condition Max. Working voltage VWM -15 +15 V ESD discharge voltage VESD (contact) -10 +10 kV VESD (air) -14 +14 Operating temperature Top -55 +125 Storage temperature Tstg -65 +150 °C Discharge network: R = 330 Ω, C = 150 pF 1) Attention: Stresses above the maximum values listed here may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Maximum ratings are absolute ratings. Exceeding only one of these values may cause irreversible damage to the component. 1 Based on IEC61000-4-2. Datasheet 3 v2.0 2022-03-15 ESD103-B1-02EL Bi-directional ESD protection device, 15 V, 0.09 pF, 0402 2 Electrical characteristics 2 Note: Electrical characteristics TA = 25°C, unless otherwise specified. Device is electrically symmetrical. I ITLP or IPP I Vcl Vtr Vh VWM It IL IL VWM Vh Vtr Vcl V It ΔI Rdyn = ΔV ΔI ΔV ITLP or IPP Figure 2 I/V characteristic curve Table 3 I/V characteristic parameters Symbol Parameter Ih Holding current IL Leakage current IPP Peak pulse current, based on IEC61000-4-5 It Test current ITLP TLP current Rdyn Dynamic resistance Vcl Clamping voltage Vh Holding voltage Vt Test voltage Vtr Trigger voltage VWM Maximum working voltage Datasheet 4 v2.0 2022-03-15 ESD103-B1-02EL Bi-directional ESD protection device, 15 V, 0.09 pF, 0402 2 Electrical characteristics Table 4 DC characteristics Parameter Symbol Values Min. Unit Note or test condition Typ. Max. Trigger voltage 2) Vtr - 21 - V Leakage current IL - 0.1 50 nA Table 5 AC characteristics Parameter Symbol Values Min. Line capacitance CL Series inductance Table 6 LS Typ. Clamping voltage (TLP) 3) 4) 2 4 Max. - 0.13 0.2 - 0.09 - – 0.4 – Symbol pF V = 0 V, f = 1 MHz V = 0 V, f = 1 GHz nH Values Min. 3 Unit Note or test condition Extracted from S-parameters Protection characteristics Parameter Dynamic resistance VWM = 15 V Vcl Rdyn Unit Note or test condition Typ. Max. - 20 - V ITLP = 1 A - 36 - ITLP = 8 A - 48 - ITLP = 16 A - 1.8 - Ω Verified by design. TLP parameters: Z0 = 50 Ω, tp = 100 ns, tr = 0.6 ns, averaging window 30-60 ns. Refer to application note AN210 [2] Datasheet 5 v2.0 2022-03-15 ESD103-B1-02EL Bi-directional ESD protection device, 15 V, 0.09 pF, 0402 3 Typical characteristic diagrams 3 TA = 25 °C, unless otherwise specified. IL / A Note: Typical characteristic diagrams Figure 3 Datasheet 10 -3 10 -4 10 -5 10 -6 10 -7 10 -8 10 -9 10 -10 10 -11 10 -12 -20 -15 -10 0 Vt / V -5 5 10 15 20 Leakage current: IL = f(Vt) 6 v2.0 2022-03-15 ESD103-B1-02EL Bi-directional ESD protection device, 15 V, 0.09 pF, 0402 3 Typical characteristic diagrams 0.2 0.18 0.16 f=1MHz CL / pF 0.14 0.12 f=1GHz 0.1 0.08 0.06 0.04 0.02 0 -20 Figure 4 -15 -10 0 Vt / V -5 5 10 15 20 Line capacitance: CL = f(Vt), f = 1 MHz, 1 GHz 0.2 0.18 0.16 CL / pF 0.14 0.12 0.1 0.08 0.06 0.04 0.02 0 2 Figure 5 Datasheet 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 f / GHz Line capacitance: CL = f(f), Vt = 0 V 7 v2.0 2022-03-15 ESD103-B1-02EL Bi-directional ESD protection device, 15 V, 0.09 pF, 0402 3 Typical characteristic diagrams 350 Scope: 6 GHz, 20 GS/s Vcl / V 300 250 Vcl-max = 319 V 200 Vcl-30ns- = 43 V 150 100 50 0 -50 -50 Figure 6 0 50 100 150 200 tp / ns 250 300 350 400 450 Clamping voltage (ESD): Vcl = f(tp), 8 kV positive pulse based on IEC61000-4-2 50 0 -50 Vcl / V -100 -150 -200 Vcl-max = -319 V -250 Vcl-30ns = -41 V -300 -350 -50 Scope: 6 GHz, 20 GS/s 0 50 100 150 200 250 300 350 400 450 tp / ns Figure 7 Datasheet Clamping voltage (ESD): Vcl = f(tp), 8 kV negative pulse based on IEC61000-4-2 8 v2.0 2022-03-15 ESD103-B1-02EL Bi-directional ESD protection device, 15 V, 0.09 pF, 0402 3 Typical characteristic diagrams 20 ESD103-B1-02EL Rdyn 15 Rdyn = 1.78 Ω 10 ITLP / A 5 0 -5 -10 Rdyn = 1.78 Ω -15 -20 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 Vcl / V Figure 8 Datasheet Clamping voltage (TLP): ITLP = f(Vcl) 9 v2.0 2022-03-15 ESD103-B1-02EL Bi-directional ESD protection device, 15 V, 0.09 pF, 0402 4 Package information TSLP-2-20 4 Package information TSLP-2-20 Top view Bottom view 0.31 +0.01 -0.02 0.6 ±0.05 1 0.5 ±0.035 1) Pin 1 marking 1±0.05 2 1) Dimension applies to plated terminals 0.25 ±0.035 1) 0.65 ±0.05 0.05 MAX. TSLP-2-19, -20-PO V01 Figure 9 Note: TSLP-2-20 package For package information including footprint, packing and assembly recommendation refer to: https://www.infineon.com/cms/en/product/packages/PG-TSLP/PG-TSLP-2-20/ Datasheet 10 v2.0 2022-03-15 ESD103-B1-02EL Bi-directional ESD protection device, 15 V, 0.09 pF, 0402 5 References 5 References [1] Infineon AG - Understanding ESD protection device characteristics [2] Infineon AG - Application note AN210: Effective ESD Protection Design at System Level Using VF-TLP Characterization Methodology 6 Revision history Document version Date of release Description of changes V2.0 2022-03-15 • Datasheet New datasheet layout 11 v2.0 2022-03-15 Trademarks All referenced product or service names and trademarks are the property of their respective owners. Edition 2022-03-15 Published by Infineon Technologies AG 81726 Munich, Germany © 2022 Infineon Technologies AG All Rights Reserved. Do you have a question about any aspect of this document? Email: erratum@infineon.com Document reference IFX-yia1643879790426 Important notice The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples, hints or any typical values stated herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. In addition, any information given in this document is subject to customer’s compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer’s products and any use of the product of Infineon Technologies in customer’s applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer’s technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application. Warnings Due to technical requirements products may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.