MRF6VP21KHR6_10

Freescale Semiconductor Technical Data Document Number: MRF6VP21KH Rev. 4, 4/2010 RF Power Field Effect Transistor N--Channel Enhancement--Mode Lateral MOSFET Designed primarily for pulsed wideband applications with frequencies up to 235 MHz. Device is unmatched and is suitable for use in industrial, medical and scientific applications. • Typical Pulsed Performance at 225 MHz: VDD = 50 Volts, IDQ = 150 mA, Pout = 1000 Watts Peak (200 W Avg.), Pulse Width = 100 μsec, Duty Cycle = 20% Power Gain — 24 dB Drain Efficiency — 67.5% • Capable of Handling 10:1 VSWR, @ 50 Vdc, 225 MHz, 1000 Watts Peak Power Features • Characterized with Series Equivalent Large--Signal Impedance Parameters • CW Operation Capability with Adequate Cooling • Qualified Up to a Maximum of 50 VDD Operation • Integrated ESD Protection • Designed for Push--Pull Operation • Greater Negative Gate--Source Voltage Range for Improved Class C Operation • RoHS Compliant • In Tape and Reel. R6 Suffix = 150 Units per 56 mm, 13 inch Reel. MRF6VP21KHR6 10-235 MHz, 1000 W, 50 V LATERAL N-CHANNEL BROADBAND RF POWER MOSFET CASE 375D-05, STYLE 1 NI-1230 PART IS PUSH-PULL RFinA/VGSA 3 1 RFoutA/VDSA RFinB/VGSB 4 2 RFoutB/VDSB (Top View) Figure 1. Pin Connections Table 1. Maximum Ratings Rating Drain--Source Voltage Gate--Source Voltage Storage Temperature Range Case Operating Temperature Operating Junction Temperature (1,2) Symbol VDSS VGS Tstg TC TJ Value --0.5, +110 --6, +10 -- 65 to +150 150 225 Unit Vdc Vdc °C °C °C Table 2. Thermal Characteristics Characteristic Thermal Resistance, Junction to Case Case Temperature 80°C, 1000 W Pulsed, 100 μsec Pulse Width, 20% Duty Cycle Symbol ZθJC Value (2,3) 0.03 Unit °C/W 1. Continuous use at maximum temperature will affect MTTF. 2. MTTF calculator available at http://www.freescale.com/rf. Select Software & Tools/Development Tools/Calculators to access MTTF calculators by product. 3. Refer to AN1955, Thermal Measurement Methodology of RF Power Amplifiers. Go to http://www.freescale.com/rf. Select Documentation/Application Notes -- AN1955. © Freescale Semiconductor, Inc., 2008, 2010. All rights reserved. MRF6VP21KHR6 1 RF Device Data Freescale Semiconductor Table 3. ESD Protection Characteristics Test Methodology Human Body Model (per JESD22--A114) Machine Model (per EIA/JESD22--A115) Charge Device Model (per JESD22--C101) Class 2 (Minimum) A (Minimum) IV (Minimum) Table 4. Electrical Characteristics (TA = 25°C unless otherwise noted) Characteristic Off Characteristics (1) Symbol IGSS V(BR)DSS IDSS IDSS Min — 110 — — Typ — — — — Max 20 — 100 5 Unit μAdc Vdc μAdc mA Gate--Source Leakage Current (VGS = 5 Vdc, VDS = 0 Vdc) Drain--Source Breakdown Voltage (ID = 300 mA, VGS = 0 Vdc) Zero Gate Voltage Drain Leakage Current (VDS = 50 Vdc, VGS = 0 Vdc) Zero Gate Voltage Drain Leakage Current (VDS = 100 Vdc, VGS = 0 Vdc) On Characteristics Gate Threshold Voltage (1) (VDS = 10 Vdc, ID = 1600 μAdc) Gate Quiescent Voltage (2) (VDD = 50 Vdc, ID = 150 mAdc, Measured in Functional Test) Drain--Source On--Voltage (1) (VGS = 10 Vdc, ID = 4 Adc) Dynamic Characteristics (1) Reverse Transfer Capacitance (VDS = 50 Vdc ± 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc) Output Capacitance (VDS = 50 Vdc ± 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc) Input Capacitance (VDS = 50 Vdc, VGS = 0 Vdc ± 30 mV(rms)ac @ 1 MHz) VGS(th) VGS(Q) VDS(on) 1 1.5 — 1.68 2.2 0.28 3 3.5 — Vdc Vdc Vdc Crss Coss Ciss — — — 3.3 147 506 — — — pF pF pF Functional Tests (2) (In Freescale Test Fixture, 50 ohm system) VDD = 50 Vdc, IDQ = 150 mA, Pout = 1000 W Peak (200 W Avg.), f = 225 MHz, 100 μsec Pulse Width, 20% Duty Cycle Power Gain Drain Efficiency Input Return Loss 1. Each side of device measured separately. 2. Measurement made with device in push--pull configuration. Gps ηD IRL 22 65 — 24 67.5 --15 26 — --9 dB % dB MRF6VP21KHR6 2 RF Device Data Freescale Semiconductor VBIAS + C1 + C2 + B1 L1 R1 R2 L4 + C15 + VSUPPLY + C20 C3 C4 C5 C6 C7 C8 C9 C10 C11 C21 Z14 C13 C14 C16 C17 C18 C19 Z10 Z12 Z4 RF INPUT Z1 Z2 L2 Z3 J1 C12 T1 Z5 Z7 Z6 Z8 Z16 RF OUTPUT L3 Z9 DUT Z11 Z13 Z18 C23 Z15 C24 Z17 T2 C22 J2 Z19 C25 Z1 Z2* Z3* Z4, Z5 Z6, Z7 Z8, Z9 Z10, Z11 0.100″ x 0.082″ Microstrip 1.557″ x 0.082″ Microstrip 0.055″ x 0.082″ Microstrip 0.133″ x 0.193″ Microstrip 0.143″ x 0.518″ Microstrip 0.357″ x 0.518″ Microstrip 0.200″ x 0.518″ Microstrip Z12, Z13 Z14, Z15 Z16*, Z17* Z18 Z19 PCB 0.599″ x 0.253″ Microstrip 0.110″ x 0.253″ Microstrip 0.055″ x 0.253″ Microstrip 0.069″ x 0.082″ Microstrip 1.050″ x 0.082″ Microstrip Arlon CuClad 250GX--0300--55--22, 0.030″, εr = 2.55 *Line length includes microstrip bends. Figure 2. MRF6VP21KHR6 Test Circuit Schematic Table 5. MRF6VP21KHR6 Test Circuit Component Designations and Values Part B1 C1 C2 C3 C4, C9, C17 C5, C16 C6, C15 C7 C8 C10, C11, C13, C14 C12, C21, C22 C18, C19, C20 C23, C24 C25 J1, J2 L1 L2 L3 L4* R1 R2 T1 T2 *L4 is wrapped around R2. Description 95 Ω, 100 MHz Long Ferrite Bead 47 μF, 50 V Electrolytic Capacitor 22 μF, 35 V Tantalum Capacitor 10 μF, 35 V Tantalum Capacitor 10K pF Chip Capacitors 20K pF Chip Capacitors 0.1 μF, 50 V Chip Capacitors 2.2 μF, 50 V Chip Capacitor 0.22 μF, 100 V Chip Capacitor 1000 pF Chip Capacitors 27 pF Chip Capacitors 470 μF, 63 V Electrolytic Capacitors 68 pF Chip Capacitors 4.7 pF Chip Capacitor Jumpers from PCB to T1 and T2 82 nH Inductor 8 nH Inductor 1 Turn Inductor, Red Coil 10 Turn, #18 AWG Inductor, Hand Wound 1 KΩ, 1/4 W Axial Leaded Resistor 20 Ω, 3 W Chip Resistor Balun Balun Part Number 2743021447 476KXM050M T491X226K035AT T491D106K035AT ATC200B103KT50XT ATC200B203KT50XT CDR33BX104AKYS C1825C225J5RAC C1825C223K1GAC ATC100B102JT50XT ATC100B270JT500XT EKME630ELL471MK25S ATC100B680JT500XT ATC100B4R7JT500XT Copper Foil 1812SMS--82NJC A03TKLC GA3092--AL Copper Wire CMF601000R0FKEK CPF320R000FKE14 TUI--9 TUO--4 Vishay Vishay Comm Concepts Comm Concepts CoilCraft CoilCraft CoilCraft Manufacturer Fair--Rite Illinois Cap Kemet Kemet ATC ATC Kemet Kemet Kemet ATC ATC Multicomp ATC ATC MRF6VP21KHR6 RF Device Data Freescale Semiconductor 3 C1 C4 C5 C6 C17 C16 C15 C19 B1 C2 C3 C7 C8 C9 C11 J1 L2 C12 R1 L1 C18 C20 C14 C21 C10 T1 C23 C24 L3 CUT OUT AREA J2 L4, R2* C13 T2 C22 C25 MRF6VP21KH Rev. 1 * L4 is wrapped around R2. Figure 3. MRF6VP21KHR6 Test Circuit Component Layout MRF6VP21KHR6 4 RF Device Data Freescale Semiconductor TYPICAL CHARACTERISTICS 1000 Ciss Coss 100 Measured with ±30 mV(rms)ac @ 1 MHz VGS = 0 Vdc ID, DRAIN CURRENT (AMPS) 100 C, CAPACITANCE (pF) TJ = 200°C TJ = 150°C TJ = 175°C 10 10 Crss 1 0 10 20 30 40 50 VDS, DRAIN--SOURCE VOLTAGE (VOLTS) 1 1 TC = 25°C 10 VDS, DRAIN--SOURCE VOLTAGE (VOLTS) 100 Note: Each side of device measured separately. Figure 4. Capacitance versus Drain-Source Voltage 26 80 70 ηD, DRAIN EFFICIENCY (%) Pout, OUTPUT POWER (dBm) 60 50 40 30 ηD 20 10 2000 65 64 63 62 61 60 59 58 57 56 55 30 Note: Each side of device measured separately. Figure 5. DC Safe Operating Area VDD = 50 Vdc, IDQ = 150 mA, f = 225 MHz 25 Pulse Width = 100 μsec, Duty Cycle = 20% Gps P3dB = 61.33 dBm (1358.31 W) P1dB = 60.37 dBm (1088.93 W) Ideal Gps, POWER GAIN (dB) 24 23 22 21 20 19 10 Actual VDD = 50 Vdc, IDQ = 150 mA, f = 225 MHz Pulse Width = 100 μsec, Duty Cycle = 20% 31 32 33 34 35 36 37 38 39 40 100 Pout, OUTPUT POWER (WATTS) PULSED 1000 Pin, INPUT POWER (dBm) PULSED Figure 6. Pulsed Power Gain and Drain Efficiency versus Output Power 28 IDQ = 6000 mA 26 Gps, POWER GAIN (dB) 24 22 20 18 10 3600 mA 1500 mA 750 mA 375 mA 150 mA Gps, POWER GAIN (dB) 24 28 Figure 7. Pulsed Output Power versus Input Power 20 VDD = 30 V 16 35 V 40 V 45 V 50 V VDD = 50 Vdc, f = 225 MHz Pulse Width = 100 μsec, Duty Cycle = 20% 100 Pout, OUTPUT POWER (WATTS) PULSED 1000 2000 12 0 200 400 600 800 IDQ = 150 mA, f = 225 MHz Pulse Width = 100 μsec Duty Cycle = 20% 1000 1200 1400 1600 Pout, OUTPUT POWER (WATTS) PULSED Figure 8. Pulsed Power Gain versus Output Power Figure 9. Pulsed Power Gain versus Output Power MRF6VP21KHR6 RF Device Data Freescale Semiconductor 5 TYPICAL CHARACTERISTICS 65 TC = --30_C Pout, OUTPUT POWER (dBm) 60 25_C 55 50 45 40 20 Gps, POWER GAIN (dB) 85_C VDD = 50 Vdc 25 IDQ = 150 mA f = 225 MHz 24 Pulse Width = 100 μsec Duty Cycle = 20% 23 22 21 20 19 45 18 10 100 Pout, OUTPUT POWER (WATTS) PULSED 1000 Gps ηD 26 90 TC = --30_C 80 70 60 50 40 30 20 10 2000 ηD, DRAIN EFFICIENCY (%) 85_C 25_C VDD = 50 Vdc IDQ = 150 mA f = 225 MHz Pulse Width = 100 μsec Duty Cycle = 20% 25 30 35 40 Pin, INPUT POWER (dBm) PULSED Figure 10. Pulsed Output Power versus Input Power 0.2 0.18 ZJC, THERMAL IMPEDANCE (°C/W) 0.16 0.14 0.12 0.1 0.08 0.06 0.04 0.02 0 0.00001 0.0001 0.001 0.01 D = 0.1 PD t1 t2 D = 0.5 MTTF (HOURS) 10 D = 0.7 Figure 11. Pulsed Power Gain and Drain Efficiency versus Output Power 109 108 107 D = Duty Factor = t1/t2 t1 = Pulse Width t2 = Pulse Period TJ = PD * ZJC + TC 106 90 110 130 150 170 190 210 230 250 TJ, JUNCTION TEMPERATURE (°C) This above graph displays calculated MTTF in hours when the device is operated at VDD = 50 Vdc, Pout = 1000 W Peak, Pulse Width = 100 μsec, Duty Cycle = 20%, and ηD = 67.5%. MTTF calculator available at http://www.freescale.com/rf. Select Software & Tools/Development Tools/Calculators to access MTTF calculators by product. 0.1 1 RECTANGULAR PULSE WIDTH (S) Figure 12. Maximum Transient Thermal Impedance Figure 13. MTTF versus Junction Temperature MRF6VP21KHR6 6 RF Device Data Freescale Semiconductor f = 225 MHz Zsource Zo = 5 Ω f = 225 MHz Zload VDD = 50 Vdc, IDQ = 150 mA, Pout = 1000 W Peak f MHz 225 Zsource Ω 1.16 + j4.06 Zload Ω 2.86 + j1.10 Zsource = Test circuit impedance as measured from gate to gate, balanced configuration. Zload = Test circuit impedance as measured from drain to drain, balanced configuration. Input Matching Network + Device Under Test -- Output Matching Network -Z source Z + load Figure 14. Series Equivalent Source and Load Impedance MRF6VP21KHR6 RF Device Data Freescale Semiconductor 7 PACKAGE DIMENSIONS MRF6VP21KHR6 8 RF Device Data Freescale Semiconductor MRF6VP21KHR6 RF Device Data Freescale Semiconductor 9 PRODUCT DOCUMENTATION AND SOFTWARE Refer to the following documents to aid your design process. Application Notes • AN1955: Thermal Measurement Methodology of RF Power Amplifiers Engineering Bulletins • EB212: Using Data Sheet Impedances for RF LDMOS Devices Software • Electromigration MTTF Calculator • RF High Power Model For Software, do a Part Number search at http://www.freescale.com, and select the “Part Number” link. Go to the Software & Tools tab on the part’s Product Summary page to download the respective tool. REVISION HISTORY The following table summarizes revisions to this document. Revision 0 1 Date Jan. 2008 Apr. 2008 • Initial Release of Data Sheet • Corrected description and part number for the R1 resistor and updated R2 resistor to latest RoHS compliant part number in Table 5, Test Circuit Component Designations and Values, and updated the footnote to read “L4” versus “L3”, p. 3. • Added Fig. 12, Maximum Transient Thermal Impedance, p. 6 2 Sept. 2008 • Added Note to Fig. 4, Capacitance versus Drain--Source Voltage, to denote that each side of device is measured separately, p. 5 • Updated Fig. 5, DC Safe Operating Area, to clarify that measurement is on a per--side basis, p. 5 • Corrected Fig. 13, MTTF versus Junction Temperature, to reflect the correct die size and increased the MTTF factor accordingly, p. 6 3 Dec. 2008 • Fig. 14, Series Equivalent Source and Load Impedance, corrected Zsource copy to read “Test circuit impedance as measured from gate to gate, balanced configuration” and Zload copy to read “Test circuit impedance as measured from drain to drain, balanced configuration”; replaced impedance diagram to show push--pull test conditions, p. 7 • Operating Junction Temperature increased from 200°C to 225°C in Maximum Ratings table and related “Continuous use at maximum temperature will affect MTTF” footnote added, p. 1 • Reporting of pulsed thermal data now shown using the ZθJC symbol, p. 1 • Added Electromigration MTTF Calculator and RF High Power Model availability to Product Software, p. 10 Description 4 Apr. 2010 MRF6VP21KHR6 10 RF Device Data Freescale Semiconductor How to Reach Us: Home Page: www.freescale.com Web Support: http://www.freescale.com/support USA/Europe or Locations Not Listed: Freescale Semiconductor, Inc. Technical Information Center, EL516 2100 East Elliot Road Tempe, Arizona 85284 1--800--521--6274 or +1--480--768--2130 www.freescale.com/support Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7 81829 Muenchen, Germany +44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) www.freescale.com/support Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1--8--1, Shimo--Meguro, Meguro--ku, Tokyo 153--0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor China Ltd. Exchange Building 23F No. 118 Jianguo Road Chaoyang District Beijing 100022 China +86 10 5879 8000 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center 1--800--441--2447 or +1--303--675--2140 Fax: +1--303--675--2150 LDCForFreescaleSemiconductor@hibbertgroup.com Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”, must be validated for each customer application by customer’s technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescalet and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2008, 2010. All rights reserved. MRF6VP21KHR6 Document Number: RF Device Data MRF6VP21KH Rev. 4, 4/2010 Freescale Semiconductor 11