5.0X6.0mm SURFACE MOUNT LED LAMP
ATTENTION
OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICE S
AA5060PBC/H
BLUE
Features
z SINGLE
Description
The Blue source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or ON TAPE AND REEL. anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded.
COLOR. FOR ALL SMT ASSEMBLY AND SOLDER
z SUITABLE
PROCESS.
z AVAILABLE z IDEAL
FOR BACKLIGHTING. : 500PCS / REEL.
z PACKAGE z RoHS
COMPLIANT.
Package Dimensions
Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice.
SPEC NO: DSAB8382 APPROVED: J. Lu
REV NO: V.5 CHECKED: Allen Liu
DATE: MAR/08/2005 DRAWN: S.H.CHEN
PAGE: 1 OF 4 ERP:1201000520
Selection Guid e
Part No. Dice Lens Type Iv (mcd) @ 30mA Min. AA5060PBC/H BLUE (InGaN) WATER CLEAR 280 Typ. 500 Viewing Angle 2θ1/2 100°
Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Blue Blue Blue Blue Blue Blue Device Typ. 467 470 30 110 3.7 4.3 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature
Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Blue 129 30 100 5 -40°C To +85°C
Units mW mA mA V
SPEC NO: DSAB8382 APPROVED: J. Lu
REV NO: V.5 CHECKED: Allen Liu
DATE: MAR/08/2005 DRAWN: S.H.CHEN
PAGE: 2 OF 4 ERP:1201000520
Blue
AA5060PBC/H
SPEC NO: DSAB8382 APPROVED: J. Lu
REV NO: V.5 CHECKED: Allen Liu
DATE: MAR/08/2005 DRAWN: S.H.CHEN
PAGE: 3 OF 4 ERP:1201000520
AA5060PBC/H
Recommended Soldering Pattern (Units : mm )
Tape Specifications (Units : mm )
Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength), the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard).
SPEC NO: DSAB8382 APPROVED: J. Lu
REV NO: V.5 CHECKED: Allen Liu
DATE: MAR/08/2005 DRAWN: S.H.CHEN
PAGE: 4 OF 4 ERP:1201000520
很抱歉,暂时无法提供与“AA5060PBC”相匹配的价格&库存,您可以联系我们找货
免费人工找货