AA5060TGC

5.0X6.0mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICE S AA5060TGC GREEN Features z SINGLE Description The Green source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. ON TAPE AND REEL. I t is recommended to use a wrist band or anti -electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. FOR ALL SMT ASSEMBLY AND SOLDER COLOR. z SUITABLE PROCESS. z AVAILABLE z IDEAL FOR BACKLIGHTING. : 500PCS / REEL. z PACKAGE zRoHS COMPLIANT. . Package Dimension s Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD0901 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/09/2005 DRAWN: S.H.CHEN PAGE: 1 OF 4 ERP:1201001118 Selection Guid e Part No. Dice Lens Type Iv (mcd) @ 30mA Min. AA5060TGC GREEN (InGaN) WATER CLEAR 70 Typ. 250 Viewing Angle 2θ1/2 100° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Green Green Green Green Green Green Typ. 500 505 30 56 3.6 4.4 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Green 132 30 150 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAD0901 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/09/2005 DRAWN: S.H.CHEN PAGE: 2 OF 4 ERP:1201001118 Green AA5060TGC SPEC NO: DSAD0901 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/09/2005 DRAWN: S.H.CHEN PAGE: 3 OF 4 ERP:1201001118 AA5060TGC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength), the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard). SPEC NO: DSAD0901 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/09/2005 DRAWN: S.H.CHEN PAGE: 4 OF 4 ERP:1201001118