NTK3134NT1G

NTK3134N Power MOSFET 20 V, 890 mA, Single N−Channel with ESD Protection, SOT−723 Features • • • • • www.onsemi.com N−Channel Switch with Low RDS(on) 44% Smaller Footprint and 38% Thinner than SC89 Low Threshold Levels Allowing 1.5 V RDS(on) Rating Operated at Low Logic Level Gate Drive These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant V(BR)DSS 20 V RDS(on) TYP ID Max 0.20 W @ 4.5 V 890 mA 0.26 W @ 2.5 V 790 mA 0.43 W @ 1.8 V 700 mA 0.56 W @ 1.5 V 200 mA Applications • • • • SOT−723 (3−LEAD) Load/Power Switching Interface Switching Logic Level Shift Battery Management for Ultra Small Portable Electronics 3 MAXIMUM RATINGS (TJ = 25°C unless otherwise stated) Symbol Value Unit Drain−to−Source Voltage Parameter VDSS 20 V Gate−to−Source Voltage VGS ±6 V ID 890 mA Continuous Drain Current (Note 1) Power Dissipation (Note 1) Steady State TA = 25°C TA = 85°C 640 t≤5s TA = 25°C 990 Steady State TA = 25°C PD Steady State Power Dissipation (Note 2) Pulsed Drain Current Top View 1 − Gate 2 − Source 3 − Drain MARKING DIAGRAM mW 450 550 TA = 25°C ID TA = 85°C TA = 25°C tp = 10 ms Operating Junction and Storage Temperature Lead Temperature for Soldering Purposes (1/8” from case for 10 s) mA 750 © Semiconductor Components Industries, LLC, 2014 SOT−723 CASE 631AA STYLE 5 540 PD 310 mW IDM 1.8 A TJ, TSTG −55 to 150 °C 260 °C TL Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Surface mounted on FR4 board using 1 in sq pad size (Cu area = 1.127 in sq [1 oz] including traces) 2. Surface mounted on FR4 board using the minimum recommended pad size October, 2014 − Rev. 3 2 KF M t≤5s Continuous Drain Current (Note 2) 1 1 1 KF M = Specific Device Code = Date Code ORDERING INFORMATION Device Package Shipping† NTK3134NT1G SOT−723* 4000 / Tape & Reel NTK3134NT5G SOT−723* 8000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. *These packages are inherently Pb−Free. Publication Order Number: NTK3134N/D NTK3134N THERMAL RESISTANCE RATINGS Symbol Max Unit Junction−to−Ambient – Steady State (Note 3) Parameter RqJA 280 °C/W Junction−to−Ambient – t = 5 s (Note 3) RqJA 228 Junction−to−Ambient – Steady State Minimum Pad (Note 4) RqJA 400 3. Surface mounted on FR4 board using 1 in sq pad size (Cu area = 1.127 in sq [1 oz] including traces) 4. Surface mounted on FR4 board using the minimum recommended pad size MOSFET ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified) Parameter Symbol Test Condition Min V(BR)DSS VGS = 0 V, ID = 250 mA 20 Drain−to−Source Breakdown Voltage Temperature Coefficient V(BR)DSS/TJ ID = 250 mA, Reference to 25°C Zero Gate Voltage Drain Current IDSS Typ Max Unit OFF CHARACTERISTICS Drain−to−Source Breakdown Voltage Gate−to−Source Leakage Current VGS = 0 V, VDS = 16 V V 18 mV/°C TJ = 25°C 1.0 TJ = 125°C 2.0 IGSS VDS = 0 V, VGS = ±4.5 V VGS(TH) VGS = VDS, ID = 250 mA ±0.5 mA mA ON CHARACTERISTICS (Note 5) Gate Threshold Voltage Negative Threshold Temperature Coefficient VGS(TH)/TJ Drain−to−Source On Resistance RDS(on) Forward Transconductance 0.45 1.2 2.4 gFS V mV/°C VGS = 4.5 V, ID = 890 mA 0.20 0.35 VGS = 2.5 V, ID = 780 mA 0.26 0.45 VGS = 1.8 V, ID = 700 mA 0.43 0.65 VGS = 1.5 V, ID = 200 mA 0.56 1.2 VDS = 10 V, ID = 800 mA 1.6 VGS = 0 V, f = 1 MHz, VDS = 16 V 79 120 W S CHARGES, CAPACITANCES AND GATE RESISTANCE Input Capacitance CISS Output Capacitance COSS 13 20 Reverse Transfer Capacitance CRSS 9.0 15 pF SWITCHING CHARACTERISTICS, VGS = 4.5 V (Note 6) Turn On Delay Time Rise Time TurnOff Delay Time Fall Time td(ON) tr VGS = 4.5 V, VDS = 10 V, ID = 500 mA, RG = 10 W ns 6.7 4.8 td(OFF) 17.3 tf 7.4 DRAIN SOURCE DIODE CHARACTERISTICS Forward Diode Voltage VSD Reverse Recovery Time tRR VGS = 0 V, IS = 350 mA TJ = 25°C VGS = 0 V, dISD/dt = 100 A/ms, IS = 1.0 A, VDD = 20 V 0.75 8.1 Charge Time ta Discharge Time tb 1.7 QRR 3.0 Reverse Recovery Charge 1.2 V ns 6.4 nC Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 5. Pulse Test: pulse width = 300 ms, duty cycle = 2% 6. Switching characteristics are independent of operating junction temperatures www.onsemi.com 2 NTK3134N TYPICAL CHARACTERISTICS 2.0 2.0 VDS ≥ 5 V VGS = 4.5 V to 2.2 V ID, DRAIN CURRENT (A) ID, DRAIN CURRENT (A) 2.0 V 1.5 1.8 V TJ = 25°C 1.0 1.6 V 1.5 V 0.5 1.5 1.0 TJ = 25°C 0.5 TJ = 125°C 1.4 V 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 0.75 6 1.25 1.5 1.75 Figure 1. On−Region Characteristics Figure 2. Transfer Characteristics RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) VGS, GATE−TO−SOURCE VOLTAGE (V) 1.50 ID = 0.89 A TJ = 25°C 1.25 1.00 0.75 0.50 0.25 0 1 1.0 VDS, DRAIN−TO−SOURCE VOLTAGE (V) 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 2.0 0.30 TJ = 25°C 0.28 0.25 VGS = 2.5 V 0.23 0.20 VGS = 4.5 V 0.18 0.15 0.3 0.6 0.8 1.1 1.3 1.6 1.8 VGS, GATE VOLTAGE (V) ID, DRAIN CURRENT (A) Figure 3. On−Resistance vs. Gate−to−Source Voltage Figure 4. On−Resistance vs. Drain Current and Gate Voltage 10,000 0.6 VGS = 0 V VGS = 1.5 V, ID = 200 mA IDSS, LEAKAGE (nA) RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) 0 RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) TJ = −55°C 0 0 0.5 VGS = 1.8 V, ID = 710 mA 0.4 VGS = 2.5 V, ID = 710 mA 0.3 TJ = 150°C 1000 TJ = 125°C 100 0.2 0.1 −60 −35 VGS = 4.5 V, ID = 1 A −10 15 40 65 10 90 140 115 5.0 10 15 TJ, JUNCTION TEMPERATURE (°C) VDS, DRAIN−TO−SOURCE VOLTAGE (V) Figure 5. On−Resistance Variation with Temperature Figure 6. Drain−to−Source Leakage Current vs. Voltage www.onsemi.com 3 20 NTK3134N TYPICAL CHARACTERISTICS 140 100 120 100 t, TIME (ns) Ciss 80 60 td(off) 10 tf td(on) tr 40 Coss 20 Crss 1 0 0 2 4 6 8 10 12 14 16 18 1 20 10 100 DRAIN−TO−SOURCE VOLTAGE (V) RG, GATE RESISTANCE (W) Figure 7. Capacitance Variation Figure 8. Resistive Switching Time Variation vs. Gate Resistance 1.0 150°C VGS = 0 V 0.9 IS, SOURCE CURRENT (A) C, CAPACITANCE (pF) VDD = 10 V ID = 500 mA VGS = 4.5 V VGS = 0 V TJ = 25°C 0.8 125°C 25°C 0.7 0.6 0.5 0.4 0.3 TJ = −55°C 0.2 0.1 0 0.3 0.4 0.5 0.6 0.7 0.8 0.9 VSD, SOURCE−TO−DRAIN VOLTAGE (V) Figure 9. Diode Forward Voltage vs. Current www.onsemi.com 4 1.0 NTK3134N PACKAGE DIMENSIONS SOT−723 CASE 631AA ISSUE D NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. −X− D A b1 −Y− 3 E 1 HE 2 2X 2X b e C 0.08 X Y SIDE VIEW TOP VIEW 3X DIM A b b1 C D E e HE L L2 L 1 3X MILLIMETERS MIN NOM MAX 0.45 0.50 0.55 0.15 0.21 0.27 0.25 0.31 0.37 0.07 0.12 0.17 1.15 1.20 1.25 0.75 0.80 0.85 0.40 BSC 1.15 1.20 1.25 0.29 REF 0.15 0.20 0.25 STYLE 5: PIN 1. GATE 2. SOURCE 3. DRAIN L2 BOTTOM VIEW RECOMMENDED SOLDERING FOOTPRINT* 2X 0.40 2X 0.27 PACKAGE OUTLINE 1.50 3X 0.52 0.36 DIMENSIONS: MILLIMETERS *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NTK3134N/D