BAV199W

DISCRETE SEMICONDUCTORS DATA SHEET dbook, halfpage M3D102 BAV199W Low-leakage double diode Product data sheet Supersedes data of 1998 Jan 09 1999 May 11 NXP Semiconductors Product data sheet Low-leakage double diode FEATURES • Small plastic SMD package • Low leakage current: typ. 3 pA • Switching time: typ. 0.8 μs • Continuous reverse voltage: max. 75 V • Repetitive peak reverse voltage: max. 85 V • Repetitive peak forward current: max. 500 mA. APPLICATIONS • Low-leakage current applications in surface mounted circuits. DESCRIPTION Epitaxial, medium-speed switching, double diode in a small plastic SOT323 (SC-70) SMD package. The diodes are connected in series. Marking code: JY- = made in Hong Kong; JYt = made in Malaysia. BAV199W PINNING PIN 1 2 3 anode cathode cathode; anode DESCRIPTION handbook, halfpage 3 3 1 2 1 Top view 2 MAM391 Fig.1 Simplified outline (SOT323; SC-70) and symbol. LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134). SYMBOL PARAMETER CONDITIONS MIN. − − single diode loaded; Ts = 90 °C; see Fig.2 − − square wave; Tj = 25 °C prior to surge; see Fig.4 tp = 1 μ s t p = 1 ms tp = 1 s Ptot Tstg Tj total power dissipation storage temperature junction temperature single diode loaded; Ts = 90 °C double diode loaded; Ts = 90 °C − − − − − −65 − 4 1 0.5 150 240 +150 150 A A A mW mW °C °C double diode loaded; Ts = 90 °C; see Fig.2 − IFRM IFSM repetitive peak forward current non-repetitive peak forward current MAX. UNIT Per diode unless otherwise specified VRRM VR IF repetitive peak reverse voltage continuous reverse voltage continuous forward current 85 75 135 110 500 V V mA mA mA 1999 May 11 2 NXP Semiconductors Product data sheet Low-leakage double diode ELECTRICAL CHARACTERISTICS Tj = 25 °C unless otherwise specified. SYMBOL Per diode VF forward voltage see Fig.3 I F = 1 mA I F = 1 0 mA I F = 5 0 mA IF = 150 mA IR reverse current see Fig.5 VR = 75 V VR = 75 V; Tj = 150 °C Cd trr diode capacitance reverse recovery time f = 1 MHz; VR = 0; see Fig.6 when switched from IF = 10 mA to IR = 10 mA; RL = 100 Ω; measured at IR = 1 mA; see Fig.7 0.003 3 2 0.8 5 − − − − PARAMETER CONDITIONS TYP. BAV199W MAX. UNIT 900 1 000 1100 1 250 mV mV mV mV nA nA pF μs 80 − 3 THERMAL CHARACTERISTICS SYMBOL Rth j-s PARAMETER thermal resistance from junction to soldering point CONDITIONS Ts = 90 °C VALUE 400 UNIT K/W 1999 May 11 3 NXP Semiconductors Product data sheet Low-leakage double diode GRAPHICAL DATA BAV199W handbook, halfpage 300 MBK522 handbook, halfpage 300 MLB752 - 1 IF (mA) 200 (1) IF (mA) 200 (2) (1) (2) (3) 100 100 0 0 (1) Single diode loaded. (2) Double diodes loaded. 100 Ts (°C) 200 0 0 0.4 0.8 1.2 V F (V) 1.6 (1) Tj = 150 °C; typical values. (2) Tj = 25 °C; typical values. (3) Tj = 25 °C; maximum values. Fig.2 Maximum permissible continuous forward current as a function of soldering point temperature; per diode. Fig.3 Forward current as a function of forward voltage; per diode. 102 handbook, full pagewidth IFSM (A) MBG704 10 1 10−1 1 10 102 103 tp (μs) 104 Based on square wave currents. Tj = 25 °C prior to surge. Fig.4 Maximum permissible non-repetitive peak forward current as a function of pulse duration per diode. 1999 May 11 4 NXP Semiconductors Product data sheet Low-leakage double diode BAV199W 10 2 handbook, halfpage IR (nA) 10 (1) MLB754 handbook, halfpage 2 MBG526 Cd (pF) 1 1 10 1 10 2 (2) 0 10 3 0 5 10 15 0 50 100 150 T j ( C) o 200 VR (V) 20 VR = 75 V. (1) Maximum values. (2) Typical values. f = 1 MHz; Tj = 25 °C. Fig.5 Reverse current as a function of junction temperature; per diode. Fig.6 Diode capacitance as a function of reverse voltage; per diode; typical values. handbook, full pagewidth tr D.U.T. 10% SAMPLING OSCILLOSCOPE R i = 50 Ω VR 90% tp t RS = 50 Ω V = VR IF x R S IF IF t rr t (1) MGA881 input signal output signal (1) IR = 1 mA. Input signal: reverse pulse rise time tr = 0.6 ns; reverse voltage pulse duration tp = 5 μs; duty factor δ = 0.05. Oscilloscope: rise time tr = 0.35 ns. Fig.7 Reverse recovery time test circuit and waveforms. 1999 May 11 5 NXP Semiconductors Product data sheet Low-leakage double diode PACKAGE OUTLINE Plastic surface mounted package; 3 leads BAV199W SOT323 D B E A X y HE vMA 3 Q A A1 c 1 e1 e bp 2 wM B Lp detail X 0 1 scale 2 mm DIMENSIONS (mm are the original dimensions) UNIT mm A 1.1 0.8 A1 max 0.1 bp 0.4 0.3 c 0.25 0.10 D 2.2 1.8 E 1.35 1.15 e 1.3 e1 0.65 HE 2.2 2.0 Lp 0.45 0.15 Q 0.23 0.13 v 0.2 w 0.2 OUTLINE VERSION SOT323 REFERENCES IEC JEDEC EIAJ SC-70 EUROPEAN PROJECTION ISSUE DATE 97-02-28 1999 May 11 6 NXP Semiconductors Product data sheet Low-leakage double diode DATA SHEET STATUS DOCUMENT STATUS(1) Objective data sheet Preliminary data sheet Product data sheet Notes 1. Please consult the most recently issued document before initiating or completing a design. PRODUCT STATUS(2) Development Qualification Production DEFINITION BAV199W This document contains data from the objective specification for product development. This document contains data from the preliminary specification. This document contains the product specification. 2. The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. DISCLAIMERS General ⎯ Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes ⎯ NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use ⎯ NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications ⎯ Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values ⎯ Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale ⎯ NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license ⎯ Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control ⎯ This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. Quick reference data ⎯ The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. 1999 May 11 7 NXP Semiconductors Customer notification This data sheet was changed to reflect the new company name NXP Semiconductors. No changes were made to the content, except for the legal definitions and disclaimers. Contact information For additional information please visit: http://www.nxp.com For sales offices addresses send e-mail to: salesaddresses@nxp.com © NXP B.V. 2009 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 115002/00/03/pp8 Date of release: 1999 May 11 Document order number: 9397 750 05947