G3VM71PRTR05

USOP, Small and High-load-voltage Type High-load-voltage USOP Package with High Load voltage • Load voltage: 60 V, 75 V, 80 V, or 100 V • G3VM-61PR1: Low C × R = 7 pF·Ω, COFF (standard) = 0.7 pF, RoHS Compliant Note: The actual product is marked differently from the image shown here. ■Application Examples • Semiconductor test equipment • Communication equipment • Test & measurement equipment • Data loggers (Unit : mm, Average) USOP 4-pin ■Model Number Legend 1 2 3 4 5 103 1.65 Note: The actual product is marked differently from the image shown here. 1. Load Voltage 6: 60 V 7: 75 V 8: 80 V 10: 100 V 2. Contact form 1: 1a (SPST-NO) 3. Package P: USOP 4-pin 4. Additional functions R: Low On-resistance 5. Other informations When specifications overlap, serial code is added in the recorded order. Package Contact form Terminals Load voltage (peak value) * USOP4 1a (SPST-NO) Surface-mounting Terminals 75 V 120 mA 400 mA Tape cut packaging Model Minimum package quantity G3VM-61PR1 Model Minimum package quantity G3VM-61PR1(TR05) G3VM-61PR G3VM-71PR Tape packaging G3VM-61PR(TR05) 1 pc. G3VM-71PR(TR05) 120 mA G3VM-81PR G3VM-81PR(TR05) 100 V 100 mA G3VM-101PR G3VM-101PR(TR05) 500 pcs. Certified Models with Standards Certification 80 V Small and Highload-voltage 60 V Continuous load current (peak value) * Low-output-capacitance and Low-ON-resistance ■Ordering Information Current-limiting 3.25 2.2 High-dielectricstrength G3V M- @ @ @ @ @ 2PA Small and HighMulti-contact-pair High-current and (2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength RON (standard) = 10 Ω ■Package General-purpose MOS FET Relays Introduction G3VM-61PR@/71PR/81PR/101PR Note: To order tape packaging for Relays with surface-mounting terminals, add "(TR05)" to the end of the model number. Tape-cut USOPs are packaged without humidity resistance. Use manual soldering to mount them. Refer to common precautions. * The AC peak and DC value are given for the load voltage and continuous load current. DIP SOP SSOP USOP VSON G3VM-61PR@/71PR/81PR/101PR 181 Item Symbol G3VM-61PR1 G3VM-61PR G3VM-71PR G3VM-81PR G3VM-101PR High-load-voltage Input LED forward current LED forward current reduction rate Unit IF 50 mA ΔIF/°C −0.5 mA/°C LED reverse voltage VR 5 V Connection temperature TJ 125 °C Load voltage (AC peak/DC) Output General-purpose Multi-contact-pair High-current and Small and High(2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength VOFF Continuous load current (AC peak/DC) 60 IO 120 75 400 ΔIO/°C −1.2 −4 Pulse ON current lop 360 1,200 Connection temperature TJ ON current reduction rate 80 100 V 120 100 mA −1.2 −1 mA/°C 360 300 mA 125 °C Dielectric strength between I/O (See note 1.) VI-O 500 Vrms Ambient operating temperature Ta −40 to +85 °C Tstg −40 to +125 °C − 260 °C Ambient storage temperature Soldering temperature Measurement conditions Ta≥25°C Ta≥25°C t=100 ms, Duty=1/10 AC for 1 min With no icing or condensation 10 s Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. ■Electrical Characteristics (Ta = 25°C) Item Current-limiting Output High-dielectricstrength Low-output-capacitance and Low-ON-resistance Small and Highload-voltage Symbol G3VM-61PR1 G3VM-61PR G3VM-71PR G3VM-81PR G3VM-101PR Unit Minimum 1.0 LED forward voltage VF Typical 1.15 Maximum 1.3 Reverse current IR Maximum 10 Capacitance between terminals CT Typical Trigger LED forward current IFT Release LED forward current IFC Maximum resistance with output ON RON Current leakage when the relay is open ILEAK Capacitance between terminals COFF Capacitance between I/O terminals CI-O Insulation resistance between I/O terminals RI-O Turn-ON time tON Turn-OFF time tOFF Typical 15 1.0 0.5 Maximum 0.5 3 Minimum 0.1 Typical 10 Maximum 0.6 0.2 0.1 1 15 7 1.5 Maximum 1 12 14 0.2 Typical 0.7 20 30 5 6 Maximum 1.3 30 − 7 8 Typical 0.4 0.3 1000 Typical 108 Typical 0.4 IF=10 mA VR=5 V pF V=0, f=1 MHz mA IO=100 mA mA IOFF=10 μA 0.4 Maximum V μA 8 0.02 0.04 0.3 0.14 Maximum 0.2 0.5 2 0.5 0.3 Typical 0.12 0.3 0.2 0.16 0.18 Maximum 0.2 0.5 1 0.2 0.3 Measurement conditions Ω G3VM-61PR : IF=5 mA, Io=400 mA Others : IF=5 mA, Io=Continuous load current ratings, t