FGY75T95SQDT

IGBT - Field Stop, Trench 75 A, 950 V Product Preview FGY75T95SQDT Trench Field Stop 4th generation High Speed IGBT co−packaged with full current rated diode. www.onsemi.com Features • • • • • • • Maximum Junction Temperature : TJ = 175℃ Positive Temperature Co−efficient for Easy Parallel Operating High Current Capability Low Saturation Voltage: VCE(Sat) = 1.69 V (Typ.) @ IC = 75 A Fast Switching Tighten Parameter Distribution These Devices are Pb−Free and are RoHS Compliant 75 A, 950 V VCESat = 1.69 V (Typ.) C G Applications • Solar Inverter • PFC • DC/DC Converter E MAXIMUM RATINGS Rating Symbol Value Unit VCES 950 V VGES ±20 ±30 V IC 150 75 A Pulsed Collector Current (Note 1) ILM 300 A Pulsed Collector Current (Note 2) ICM 300 A IF 150 75 A Pulsed Diode Forward Current (Note 2) IFM 300 A Maximum Power Dissipation @TC = 25°C @TC = 100°C PD 434 217 W TJ, TSTG −55 to +175 °C TL 300 °C Collector to Emitter Voltage Gate to Emitter Voltage Transient Gate to Emitter Voltage Collector Current Diode Forward Current @TC = 25°C @TC = 100°C @TC = 25°C @TC = 100°C Operating Junction / Storage Temperature Range Maximum Lead Temp. for Soldering Purposes, 1/8” from case for 5 seconds May, 2020 − Rev. P1 C E TO−247−3LD CASE 340CD MARKING DIAGRAM Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. VCC = 700 V, VGE = 15 V, IC = 300 A, RG = 26 W, Inductive Load, 100% Tested 2. Pulse width limited by max Junction temperature. Defined by design. Not subject to production test © Semiconductor Components Industries, LLC, 2019 G 1 $Y&Z&3&K FGY75T95 SQDT $Y &Z &3 &K FGY75T95SQDT = ON Semiconductor Logo = Assembly Plant Code = Numeric Date Code = 2−Digit Lot Traceability Code = Specific Device Code ORDERING INFORMATION See detailed ordering and shipping information on page 2 of this data sheet. This document contains information on a product under development. ON Semiconductor reserves the right to change or discontinue this product without notice. Publication Order Number: FGY75T95SQDT/D FGY75T95SQDT ORDERING INFORMATION Part Number Top Marking Package Shipping FGY75T95SQDT FGY75T95SQDT TO−247−3LD (Pb-Free) 30 Units / Rail THERMAL CHARACTERISTICS Rating Symbol Value Unit Thermal resistance junction−to−case, for IGBT RqJC 0.35 °C/W Thermal resistance junction−to−case, for Diode RqJC 0.23 °C/W Thermal resistance junction−to−ambient RqJA 40 °C/W ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted) Parameter Test Conditions Symbol Min Typ Max Unit Collector−emitter breakdown voltage, gate−emitter short−circuited VGE = 0 V, IC = 1 mA BVCES 950 Temperature Coefficient of Breakdown Voltage VGE = 0 V, IC = 1 mA DBVCES DTJ Collector−emitter cut−off current, gate− emitter short−circuited VGE = 0 V, VCE = 950 V ICES 250 mA Gate leakage current, collector−emitter short−circuited VGE = 20 V , VCE = 0 V IGES ±400 nA VGE = VCE, IC = 75 mA VGE(th) 4.84 6.4 V VGE = 15 V, IC = 75 A VGE = 15 V, IC = 75 A, TJ = 175°C VCE(sat) 1.69 2.25 2.11 V OFF CHARACTERISTICS V V/°C 0.96 ON CHARACTERISTICS Gate−emitter threshold voltage Collector−emitter saturation voltage 3.4 DYNAMIC CHARACTERISTICS Input capacitance VCE = 30 V, VGE = 0 V, f = 1 MHz Cies 4770 Coes 241 Cres 19.7 Qg 137 Gate to emitter charge Qge 33.2 Gate to collector charge Qgc 38.6 Output capacitance Reverse transfer capacitance Gate charge total VCE = 600 V, IC = 75 V, VGE = 15 V pF nC SWITCHING CHARACTERISTICS, INDUCTIVE LOAD Turn−on delay time Rise time Turn−off delay time TJ = 25°C VCC = 600 V, IC = 37.5 A Rg = 4.7 W VGE = 15 V Inductive Load Fall time td(on) tr td(off) tf Turn−on switching loss Eon Turn−off switching loss Eoff Total switching loss Ets www.onsemi.com 2 28.8 ns 16.0 104.0 30.4 2.1 1.0 3.2 mJ FGY75T95SQDT ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted) Parameter Turn−on delay time Rise time Turn−off delay time Test Conditions Symbol TJ = 25°C VCC = 600 V, IC = 75 A Rg = 4.7 W VGE = 15 V Inductive Load td(on) Fall time tr td(off) tf Turn−on switching loss Eon Turn−off switching loss Eoff Total switching loss Ets Turn−on delay time Rise time Turn−off delay time TJ = 175°C VCC = 600 V, IC = 37.5 A Rg = 4.7 W VGE = 15 V Inductive Load Fall time td(on) tr td(off) tf Turn−on switching loss Eon Turn−off switching loss Eoff Total switching loss Ets Turn−on delay time Rise time Turn−off delay time TJ = 175°C VCC = 600 V, IC = 75 A Rg = 4.7 W VGE = 15 V Inductive Load Fall time td(on) tr td(off) tf Turn−on switching loss Eon Turn−off switching loss Eoff Total switching loss Ets Min Typ Max 31.2 Unit ns 58.4 96.0 65.6 5.4 mJ 2.1 7.6 28.8 ns 17.6 117.0 60.8 4.1 mJ 1.7 5.8 28.8 ns 60.8 106.0 92.8 8.8 mJ 3.2 12.0 DIODE CHARACTERISTICS Forward voltage Reverse Recovery Energy Reverse Recovery Time IF = 75 A IF = 75 A, TJ = 175°C VF TJ = 25°C VR = 600 V, IF = 37.5 A dIF/dt = 1000 A/ms Erec Reverse Recovery Charge Reverse Recovery Energy Reverse Recovery Time Qrr TJ = 25°C VR = 600 V, IF = 75 A dIF/dt = 1000 A/ms Reverse Recovery Charge Reverse Recovery Energy Reverse Recovery Time trr Erec trr Qrr TJ = 175°C VR = 600 V, IF = 37.5 A dIF/dt = 1000 A/ms Reverse Recovery Charge Erec trr Qrr www.onsemi.com 3 2.03 1.76 314 105 1635 2390 259 7515 454 148 2436 2.51 V uJ ns nC uJ ns nC uJ ns nC FGY75T95SQDT ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted) Parameter Reverse Recovery Energy Reverse Recovery Time Test Conditions Symbol TJ = 175°C VR = 600 V, IF = 75 A dIF/dt = 1000 A/ms Erec Reverse Recovery Charge trr Qrr Min Typ 2790 294 9175 Max Unit uJ ns nC Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. www.onsemi.com 4 FGY75T95SQDT TYPICAL CHARACTERISTICS Figure 1. Typical Output Characteristics (TJ = 255C) Figure 2. Typical Output Characteristics (TJ = 1755C) Figure 3. Transfer Characteristics Figure 4. Typical Saturation Voltage Characteristics Figure 5. Saturation Voltage vs Case Temperature at Variant Current Level Figure 6. Saturation Voltage vs. VGE (TJ = 255C) www.onsemi.com 5 FGY75T95SQDT TYPICAL CHARACTERISTICS Figure 7. Saturation Voltage vs. VGE (TJ = 1755C) Figure 8. Capacitance Characteristics Figure 9. Gate Charge Characteristics (TJ = 255C) Figure 10. Turn−on Characteristics vs. Gate Resistance Figure 11. Turn−off Characteristics vs. Gate Resistance Figure 12. Turn−on Characteristics vs. Collector Current www.onsemi.com 6 FGY75T95SQDT Switching Loss [mJ] TYPICAL CHARACTERISTICS Figure 14. Switching Loss vs. Gate Resistance Switching Loss [mJ] Figure 13. Turn−off Characteristics vs. Collector Current Figure 16. SOA Characteristics (FBSOA) Figure 15. Switching Loss vs. Collector Current J J J J J Figure 17. (Diode) Forward Characteristics vs (Normal I−V) Figure 18. (Diode) Reverse Recovery Current www.onsemi.com 7 FGY75T95SQDT TYPICAL CHARACTERISTICS J J J J Figure 19. (Diode) Reverse Recovery Time Figure 20. (Diode) Stored Charge Figure 21. Transient Thermal Impedance of IGBT Figure 22. Transient Thermal Impedance of Diode www.onsemi.com 8 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS TO−247−3LD CASE 340CD ISSUE A DATE 18 SEP 2018 GENERIC MARKING DIAGRAM* XXXXXXXXX AYWWG XXXX A Y WW G = Specific Device Code = Assembly Location = Year = Work Week = Pb−Free Package *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “G”, may or may not be present. Some products may not follow the Generic Marking. DOCUMENT NUMBER: DESCRIPTION: 98AON13857G TO−247−3LD Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2018 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. ADDITIONAL INFORMATION TECHNICAL PUBLICATIONS: Technical Library: www.onsemi.com/design/resources/technical−documentation onsemi Website: www.onsemi.com  ONLINE SUPPORT: www.onsemi.com/support For additional information, please contact your local Sales Representative at www.onsemi.com/support/sales