NGTB20N120IHLWG

NGTB20N120IHLWG IGBT This Insulated Gate Bipolar Transistor (IGBT) features a robust and cost effective Field Stop (FS) Trench construction, and provides superior performance in demanding switching applications, offering both low on−state voltage and minimal switching loss. The IGBT is well suited for resonant or soft switching applications. Incorporated into the device is a rugged co−packaged free wheeling diode with a low forward voltage. http://onsemi.com 20 A, 1200 V VCEsat = 1.80 V Eoff = 0.7 mJ Features • • • • • Low Saturation Voltage using Trench with Fieldstop Technology Low Switching Loss Reduces System Power Dissipation Optimized for Low Case Temperature in IH Cooker Application Low Gate Charge These are Pb−Free Devices C Typical Applications • Inductive Heating • Consumer Appliances • Soft Switching G E ABSOLUTE MAXIMUM RATINGS Symbol Value Unit Collector−emitter voltage Rating VCES 1200 V Collector current @ TC = 25°C @ TC = 100°C IC Pulsed collector current, Tpulse limited by TJmax ICM Diode forward current @ TC = 25°C @ TC = 100°C IF Diode pulsed current, Tpulse limited by TJmax IFM 200 Gate−emitter voltage VGE $20 Power Dissipation @ TC = 25°C @ TC = 100°C PD Operating junction temperature range TJ −55 to +150 °C Storage temperature range Tstg −55 to +150 °C Lead temperature for soldering, 1/8” from case for 5 seconds TSLD 260 °C A 40 20 200 G C TO−247 CASE 340L STYLE 4 E A A 40 20 MARKING DIAGRAM A V 20N120IHL AYWWG W 192 77 Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. A Y WW G = Assembly Location = Year = Work Week = Pb−Free Package ORDERING INFORMATION Device NGTB20N120IHLWG © Semiconductor Components Industries, LLC, 2012 August, 2012 − Rev. 1 1 Package Shipping TO−247 30 Units / Rail (Pb−Free) Publication Order Number: NGTB20N120IHL/D NGTB20N120IHLWG THERMAL CHARACTERISTICS Symbol Value Unit Thermal resistance junction−to−case, for IGBT Rating RqJC 0.65 °C/W Thermal resistance junction−to−case, for Diode RqJC 2.0 °C/W Thermal resistance junction−to−ambient RqJA 40 °C/W ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified) Parameter Test Conditions Symbol Min Typ Max Unit VGE = 0 V, IC = 500 mA V(BR)CES 1200 − − V VGE = 15 V, IC = 20 A VGE = 15 V, IC = 20 A, TJ = 150°C VCEsat − − 1.80 2.0 2.2 − V VGE = VCE, IC = 250 mA VGE(th) 4.5 5.5 6.5 V Collector−emitter cut−off current, gate− emitter short−circuited VGE = 0 V, VCE = 1200 V VGE = 0 V, VCE = 1200 V, TJ = 150°C ICES − − − − 0.5 2.0 mA Gate leakage current, collector−emitter short−circuited VGE = 20 V, VCE = 0 V IGES − − 100 nA Cies − 4700 − pF Coes − 155 − Cres − 100 − STATIC CHARACTERISTIC Collector−emitter breakdown voltage, gate−emitter short−circuited Collector−emitter saturation voltage Gate−emitter threshold voltage DYNAMIC CHARACTERISTIC Input capacitance Output capacitance VCE = 20 V, VGE = 0 V, f = 1 MHz Reverse transfer capacitance Gate charge total Gate to emitter charge nC Qg 200 Qge 36 Qgc 98 TJ = 25°C VCC = 600 V, IC = 20 A Rg = 10 W VGE = 0 V/ 15V td(off) 235 tf 180 Eoff 0.7 mJ TJ = 125°C VCC = 600 V, IC = 20 A Rg = 10 W VGE = 0 V/ 15V td(off) 235 ns tf 250 Eoff 1.60 VGE = 0 V, IF = 20 A VGE = 0 V, IF = 20 A, TJ = 150°C VF 1.55 1.65 VCE = 600 V, IC = 20 A, VGE = 15 V Gate to collector charge SWITCHING CHARACTERISTIC, INDUCTIVE LOAD Turn−off delay time Fall time Turn−off switching loss Turn−off delay time Fall time Turn−off switching loss ns mJ DIODE CHARACTERISTIC Forward voltage http://onsemi.com 2 1.75 V NGTB20N120IHLWG TYPICAL CHARACTERISTICS 120 VGE = 20 to 13 V TJ = 25°C 100 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) 120 11 V 10 V 80 60 9V 40 20 0 8V 7V 0 1 2 3 4 40 8V 20 7V 0 1 2 3 4 Figure 2. Output Characteristics 5 120 IC, COLLECTOR CURRENT (A) 100 11 V 80 10 V TJ = −40°C 60 40 9V 7V 20 8V 0 1 2 3 4 100 80 60 40 5 TJ = 150°C 20 0 TJ = 25°C 0 5 10 15 VCE, COLLECTOR−EMITTER VOLTAGE (V) VGE, GATE−EMITTER VOLTAGE (V) Figure 3. Output Characteristics Figure 4. Typical Transfer Characteristics 120 Cies IF, FORWARD CURRENT (A) IC, COLLECTOR CURRENT (A) 9V Figure 1. Output Characteristics 10,000 C, CAPACITANCE (pF) 10 V 60 VCE, COLLECTOR−EMITTER VOLTAGE (V) VGE = 20 to 13 V 1000 100 Coes Cres 10 80 VCE, COLLECTOR−EMITTER VOLTAGE (V) 120 0 100 0 5 VGE = 20 to 11 V TJ = 150°C 0 25 50 75 100 125 150 175 100 TJ = 25°C 60 40 20 0 200 TJ = 125°C 80 0 0.5 1.0 1.5 2.0 2.5 VCE, COLLECTOR−EMITTER VOLTAGE (V) VF, FORWARD VOLTAGE (V) Figure 5. Typical Capacitance Figure 6. Diode Forward Characteristics http://onsemi.com 3 3.0 NGTB20N120IHLWG TYPICAL CHARACTERISTICS Eoff, TURN−OFF SWITCHING LOSS (mJ) VGE, GATE−EMITTER VOLTAGE (V) 16 200 V 14 400 V 12 600 V 10 8 6 4 2 0 0 50 100 150 250 200 VCE = 600 V VGE = 15 V IC = 20 A Rg = 10 W 20 40 60 80 100 120 140 160 0.4 0.2 0 0 20 40 60 80 100 120 3.0 2.0 td(off) 100 VCE = 600 V VGE = 15 V TJ = 150°C Rg = 10 W 14 18 22 26 30 34 38 42 1.0 0.5 0 10 14 18 22 26 30 34 38 42 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 VCE = 600 V VGE = 15 V IC = 20 A TJ = 150°C 0.4 0.2 0 5 15 25 35 45 55 65 IC, COLLECTOR (A) Rg, GATE RESISTOR (W) Figure 11. Switching Time vs. IC Figure 12. Energy Loss vs. Rg http://onsemi.com 4 160 1.5 Figure 10. Energy Loss vs. IC 10 140 VCE = 600 V VGE = 15 V TJ = 150°C Rg = 10 W 2.5 Figure 9. Switching Time vs. Temperature Eoff, TURN−OFF SWITCHING LOSS (mJ) SWITCHING TIME (ns) 0.6 IC, COLLECTOR (A) tf 1 0.8 TEMPERATURE (°C) 1000 10 1.0 Figure 8. Energy Loss vs. Temperature tf 0 1.2 Figure 7. Typical Gate Charge Eoff, TURN−OFF SWITCHING LOSS (mJ) SWITCHING TIME (ns) 1 1.4 TEMPERATURE (°C) td(off) 10 VCE = 600 V VGE = 15 V IC = 20 A Rg = 10 W 1.6 QG, GATE CHARGE (nC) 1000 100 1.8 75 85 NGTB20N120IHLWG TYPICAL CHARACTERISTICS td(off) 1000 tf 100 10 VCE = 600 V VGE = 15 V IC = 20 A TJ = 150°C 5 15 25 35 45 55 65 85 75 1.4 1.2 1.0 0.8 VGE = 15 V IC = 20 A Rg = 10 W TJ = 150°C 0.6 0.4 0.2 0 375 425 475 525 575 625 675 725 775 Figure 13. Switching Time vs. Rg Figure 14. Energy Loss vs. VCE 1000 IC, COLLECTOR CURRENT (A) tf 100 VGE = 15 V IC = 20 A Rg = 10 W TJ = 150°C 375 425 475 525 575 625 675 725 50 ms 100 100 ms 10 dc operation 1 Single Nonrepetitive Pulse TC = 25°C Curves must be derated linearly with increase in temperature 0.1 0.01 775 1 ms 1 10 100 1000 VCE, COLLECTOR−EMITTER VOLTAGE (V) VCE, COLLECTOR−EMITTER VOLTAGE (V) Figure 15. Switching Time vs. VCE Figure 16. Safe Operating Area 1000 IC, COLLECTOR CURRENT (A) SWITCHING TIME (ns) 1.6 VCE, COLLECTOR−EMITTER VOLTAGE (V) td(off) 1 1.8 Rg, GATE RESISTOR (W) 1000 10 2.0 Eoff, TURN−OFF SWITCHING LOSS (mJ) SWITCHING TIME (ns) 10,000 100 10 1 VGE = 15 V, TC = 125°C 1 10 100 1000 VCE, COLLECTOR−EMITTER VOLTAGE (V) Figure 17. Reverse Bias Safe Operating Area http://onsemi.com 5 NGTB20N120IHLWG TYPICAL CHARACTERISTICS 1 R(t) (°C/W) 50% Duty Cycle RqJC = 0.65 20% 0.1 10% Junction R1 5% 1% C1 C2 Case 0.00001 Ri (°C/W) 0.02659 0.06231 0.10246 0.2121 0.1057 Cn ti (sec) 1.0E−4 1.76E−4 0.002 0.1 2.0 Duty Factor = t1/t2 Peak TJ = PDM x ZqJC + TC Single Pulse 0.001 0.000001 Rn Ci = ti/Ri 2% 0.01 R2 0.0001 0.001 0.01 0.1 1 10 100 1000 PULSE TIME (sec) Figure 18. IGBT Transient Thermal Impedance 10 RqJC = 2.0 R(t) (°C/W) 1 0.1 50% Duty Cycle 20% 10% 5% Junction R1 1% C1 Case 0.00001 C2 Ri (°C/W) 0.25813 0.57713 0.67147 0.38693 0.1057 Cn ti (sec) 1.48E−4 0.002 0.03 0.1 2.0 Duty Factor = t1/t2 Peak TJ = PDM x ZqJC + TC Single Pulse 0.001 0.000001 Rn Ci = ti/Ri 2% 0.01 R2 0.0001 0.001 0.01 0.1 PULSE TIME (sec) 1 Figure 19. Diode Transient Thermal Impedance Figure 20. Test Circuit for Switching Characteristics http://onsemi.com 6 10 100 1000 NGTB20N120IHLWG Figure 21. Definition of Turn On Waveform http://onsemi.com 7 NGTB20N120IHLWG Figure 22. Definition of Turn Off Waveform http://onsemi.com 8 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS TO−247 CASE 340L ISSUE G DATE 06 OCT 2021 SCALE 1:1 GENERIC MARKING DIAGRAM* XXXXXXXXX AYWWG STYLE 1: PIN 1. 2. 3. 4. GATE DRAIN SOURCE DRAIN STYLE 2: PIN 1. 2. 3. 4. ANODE CATHODE (S) ANODE 2 CATHODES (S) STYLE 5: PIN 1. 2. 3. 4. CATHODE ANODE GATE ANODE STYLE 6: PIN 1. 2. 3. 4. MAIN TERMINAL 1 MAIN TERMINAL 2 GATE MAIN TERMINAL 2 DOCUMENT NUMBER: DESCRIPTION: STYLE 3: PIN 1. 2. 3. 4. 98ASB15080C TO−247 BASE COLLECTOR EMITTER COLLECTOR STYLE 4: PIN 1. 2. 3. 4. GATE COLLECTOR EMITTER COLLECTOR XXXXX A Y WW G = Specific Device Code = Assembly Location = Year = Work Week = Pb−Free Package *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “G”, may or may not be present. Some products may not follow the Generic Marking. Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2021 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative