IRFB9N60A
www.vishay.com
Vishay Siliconix
Power MOSFET
FEATURES
D
• Low gate charge Qg results in simple drive
requirement
TO-220AB
• Improved gate, avalanche and dynamic dV/dt
ruggedness
G
G
D
Available
Available
• Fully characterized capacitance and avalanche voltage
and current
S
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
S
N-Channel MOSFET
APPLICATIONS
• Switch mode power supply (SMPS)
PRODUCT SUMMARY
VDS (V)
• Uninterruptible power supply
600
RDS(on) (Ω)
VGS = 10 V
Qg max. (nC)
49
Qgs (nC)
13
Qgd (nC)
20
Configuration
• High speed power switching
0.75
APPLICABLE OFF LINE SMPS TOPOLOGIES
• Active clamped forward
• Main switch
Single
ORDERING INFORMATION
Package
TO-220AB
Lead (Pb)-free
IRFB9N60APbF
Lead (Pb)-free and halogen-free
IRFB9N60APbF-BE3
ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted)
PARAMETER
SYMBOL
LIMIT
Drain-source voltage
VDS
600
Gate-source voltage
VGS
± 30
VGS at 10 V
Continuous drain current
TC = 25 °C
TC = 100 °C
Pulsed drain currenta
ID
UNIT
V
9.2
5.8
A
IDM
37
1.3
W/°C
Single pulse avalanche energy b
EAS
290
mJ
Repetitive avalanche current a
IAR
9.2
A
Repetitive avalanche energy a
EAR
17
mJ
PD
170
W
dV/dt
5.0
V/ns
TJ, Tstg
-55 to +150
Linear derating factor
Maximum power dissipation
Peak diode recovery dV/dt
TC = 25 °C
c
Operating junction and storage temperature range
Soldering recommendations (peak temperature) d
Mounting torque
For 10 s
6-32 or M3 screw
300
°C
10
lbf · in
1.1
N·m
Notes
a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11)
b. Starting TJ = 25 °C, L = 6.8 mH, Rg = 25 Ω, IAS = 9.2 A (see fig. 12)
c. ISD ≤ 9.2 A, dI/dt ≤ 50 A/μs, VDD ≤ VDS, TJ ≤ 150 °C
d. 1.6 mm from case
S21-0867-Rev. E, 16-Aug-2021
Document Number: 91103
1
For technical questions, contact: hvm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IRFB9N60A
www.vishay.com
Vishay Siliconix
THERMAL RESISTANCE RATINGS
PARAMETER
SYMBOL
TYP.
MAX.
Maximum junction-to-ambient
RthJA
-
62
Case-to-sink, flat, greased surface
RthCS
0.50
-
Maximum junction-to-case (drain)
RthJC
-
0.75
UNIT
°C/W
SPECIFICATIONS (TJ = 25 °C, unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN.
TYP.
MAX.
UNIT
Static
Drain-source breakdown voltage
VDS temperature coefficient
Gate-source threshold voltage
VDS
VGS = 0 V, ID = 250 μA
600
-
-
V
ΔVDS/TJ
Reference to 25 °C, ID = 1 mA
-
660
-
mV/°C
VGS(th)
VDS = VGS, ID = 250 μA
2.0
-
4.0
V
Gate-source leakage
IGSS
VGS = ± 30 V
-
-
± 100
nA
Zero gate voltage drain current
IDSS
VDS = 600 V, VGS = 0 V
-
-
25
VDS = 480 V, VGS = 0 V, TJ = 125 °C
-
-
250
Drain-source on-state resistance
Forward transconductance
μA
-
-
0.75
Ω
gfs
VDS = 50 V, ID = 5.5 A
5.5
-
-
S
VGS = 0 V,
VDS = 25 V,
f = 1.0 MHz, see fig. 5
-
1400
-
-
180
-
-
7.1
-
-
1957
-
RDS(on)
ID = 5.5 A b
VGS = 10 V
Dynamic
Input capacitance
Ciss
Output capacitance
Coss
Reverse transfer capacitance
Crss
Output capacitance
Coss
Effective output capacitance
Total gate charge
Gate-source charge
VDS = 1.0 V, f = 1.0 MHz
VGS = 0 V
Coss eff.
VDS = 480 V, f = 1.0 MHz
-
49
-
VDS = 0 V to 480 V
-
96
-
-
-
49
-
-
13
Qg
Qgs
VGS = 10 V
ID = 9.2 A, VDS = 400 V
see fig. 6 and 13 b
pF
nC
Gate-drain charge
Qgd
-
-
20
Turn-on delay time
td(on)
-
13
-
tr
VDD = 300 V, ID = 9.2 A
Rg = 9.1 Ω, RD = 35.5 Ω, see fig. 10 b
-
25
-
-
30
-
-
22
-
f = 1 MHz, open drain
0.5
-
3.2
-
-
9.2
-
-
37
-
-
1.5
-
530
800
ns
-
3.0
4.4
μC
Rise time
Turn-off delay time
td(off)
Fall time
tf
Gate input resistance
Rg
ns
Ω
Drain-Source Body Diode Characteristics
Continuous source-drain diode current
IS
Pulsed diode forward current a
ISM
Body diode voltage
VSD
Body diode reverse recovery time
trr
Body diode reverse recovery charge
Qrr
Forward turn-on time
ton
MOSFET symbol
showing the
integral reverse
p - n junction diode
D
A
G
S
TJ = 25 °C, IS = 9.2 A, VGS = 0 V b
TJ = 25 °C, IF = 9.2 A, dI/dt = 100 A/μs b
V
Intrinsic turn-on time is negligible (turn-on is dominated by LS and LD)
Notes
a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11)
b. Pulse width ≤ 300 μs; duty cycle ≤ 2 %
c. Coss effective is a fixed capacitance that gives the same charging time as Coss while VDS is rising from 0 % to 80 % VDS
S21-0867-Rev. E, 16-Aug-2021
Document Number: 91103
2
For technical questions, contact: hvm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IRFB9N60A
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
100
100
VGS
15V
10V
8.0V
7.0V
6.0V
5.5V
5.0V
BOTTOM 4.7V
I D , Drain-to-Source Current (A)
I D , Drain-to-Source Current (A)
TOP
10
1
4.7V
20µs PULSE WIDTH
TJ = 25 °C
0.1
0.1
1
10
10
TJ = 25 ° C
1
0.1
4.0
100
VDS , Drain-to-Source Voltage (V)
I D , Drain-to-Source Current (A)
10
4.7V
20µs PULSE WIDTH
TJ = 150 ° C
10
VDS , Drain-to-Source Voltage (V)
Fig. 2 - Typical Output Characteristics
S21-0867-Rev. E, 16-Aug-2021
100
RDS(on) , Drain-to-Source On Resistance
(Normalized)
3.0
VGS
15V
10V
8.0V
7.0V
6.0V
5.5V
5.0V
BOTTOM 4.7V
1
5.0
6.0
7.0
8.0
9.0
10.0
Fig. 3 - Typical Transfer Characteristics
TOP
1
V DS = 50V
20µs PULSE WIDTH
VGS , Gate-to-Source Voltage (V)
Fig. 1 - Typical Output Characteristics
100
TJ = 150 ° C
ID = 9.2A
2.5
2.0
1.5
1.0
0.5
0.0
-60 -40 -20
VGS = 10V
0
20
40
60
80 100 120 140 160
TJ , Junction Temperature ( °C)
Fig. 4 - Normalized On-Resistance vs. Temperature
Document Number: 91103
3
For technical questions, contact: hvm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IRFB9N60A
www.vishay.com
10000
V GS = 0V,
f = 1MHz
Ciss = Cgs + Cgd , Cds SHORTED
Crss = Cgd
Coss = Cds + C gd
1000
Ciss
100
ISD , Reverse Drain Current (A)
C, Capacitance (pF)
100000
Vishay Siliconix
Coss
100
10
Crss
1
10
TJ = 150 ° C
1
TJ = 25 ° C
0.1
0.2
A
1
10
100
1000
Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage
1.0
1.2
Fig. 7 - Typical Source-Drain Diode Forward Voltage
1000
ID = 9.2A
OPERATION IN THIS AREA LIMITED
BY RDS(on)
400V
VDS = 480V
VDS = 300V
VDS = 120V
16
100
ID , Drain Current (A)
VGS , Gate-to-Source Voltage (V)
0.7
VSD ,Source-to-Drain Voltage (V)
V DS , Drain-to-Source Voltage (V)
20
V GS = 0 V
0.5
12
8
10us
10
100us
1ms
1
10ms
4
FOR TEST CIRCUIT
SEE FIGURE 13
0
0
10
20
30
40
50
0.1
TC = 25 ° C
TJ = 150 ° C
Single Pulse
10
100
1000
QG , Total Gate Charge (nC)
VDS , Drain-to-Source Voltage (V)
Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage
Fig. 8 - Maximum Safe Operating Area
S21-0867-Rev. E, 16-Aug-2021
10000
Document Number: 91103
4
For technical questions, contact: hvm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IRFB9N60A
www.vishay.com
Vishay Siliconix
RD
VDS
10.0
VGS
D.U.T.
RG
+
ID , Drain Current (A)
8.0
- VDD
10V
Pulse width ≤ 1 µs
Duty factor ≤ 0.1 %
6.0
Fig. 10a - Switching Time Test Circuit
4.0
VDS
90 %
2.0
0.0
25
50
75
100
125
150
10 %
VGS
TC , Case Temperature ( ° C)
t d(on)
tr
t d(off) t f
Fig. 10b - Switching Time Waveforms
Fig. 9 - Maximum Drain Current vs. Case Temperature
Thermal Response (Z thJC )
1
D = 0.50
0.20
0.1
0.10
PDM
0.05
t1
0.02
t2
SINGLE PULSE
(THERMAL RESPONSE)
0.01
0.01
0.00001
0.0001
Notes:
1. Duty factor D = t 1 / t 2
2. Peak T J = P DM x Z thJC + TC
0.001
0.01
0.1
1
t1 , Rectangular Pulse Duration (s)
Fig. 11 - Maximum Effective Transient Thermal Impedance, Junction-to-Case
S21-0867-Rev. E, 16-Aug-2021
Document Number: 91103
5
For technical questions, contact: hvm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IRFB9N60A
www.vishay.com
Vishay Siliconix
V DS
tp
15 V
Driver
L
VDS
D.U.T.
RG
+
V
- DD
IAS
20 V
tp
A
0.01 W
I AS
Fig. 12b - Unclamped Inductive Waveforms
EAS , Single Pulse Avalanche Energy (mJ)
Fig. 12a - Unclamped Inductive Test Circuit
600
ID
4.1A
5.8A
9.2A
TOP
500
BOTTOM
400
300
200
100
0
25
50
75
100
125
150
Starting TJ , Junction Temperature ( °C)
Fig. 12c - Maximum Avalanche Energy vs. Drain Current
Current regulator
Same type as D.U.T.
QG
50 kΩ
12 V
10 V
0.2 µF
0.3 µF
QGS
Q GD
+
D.U.T.
VG
-
VDS
VGS
3 mA
Charge
Fig. 13a - Basic Gate Charge Waveform
S21-0867-Rev. E, 16-Aug-2021
IG
ID
Current sampling resistors
Fig. 13b - Gate Charge Test Circuit
Document Number: 91103
6
For technical questions, contact: hvm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IRFB9N60A
www.vishay.com
Vishay Siliconix
Peak Diode Recovery dV/dt Test Circuit
+
D.U.T.
Circuit layout considerations
• Low stray inductance
• Ground plane
• Low leakage inductance
current transformer
+
-
-
Rg
•
•
•
•
+
dV/dt controlled by Rg
Driver same type as D.U.T.
ISD controlled by duty factor “D”
D.U.T. - device under test
+
-
VDD
Driver gate drive
P.W.
Period
D=
P.W.
Period
VGS = 10 Va
D.U.T. lSD waveform
Reverse
recovery
current
Body diode forward
current
dI/dt
D.U.T. VDS waveform
Diode recovery
dV/dt
Re-applied
voltage
Inductor current
VDD
Body diode forward drop
Ripple ≤ 5 %
ISD
Note
a. VGS = 5 V for logic level devices
Fig. 14 - For N-Channel
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?91103.
S21-0867-Rev. E, 16-Aug-2021
Document Number: 91103
7
For technical questions, contact: hvm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Package Information
www.vishay.com
Vishay Siliconix
TO-220-1
A
E
F
D
H(1)
Q
ØP
3
2
L(1)
1
M*
L
b(1)
C
b
e
J(1)
e(1)
MILLIMETERS
DIM.
INCHES
MIN.
MAX.
MIN.
MAX.
A
4.24
4.65
0.167
0.183
b
0.69
1.02
0.027
0.040
b(1)
1.14
1.78
0.045
0.070
c
0.36
0.61
0.014
0.024
D
14.33
15.85
0.564
0.624
E
9.96
10.52
0.392
0.414
e
2.41
2.67
0.095
0.105
e(1)
4.88
5.28
0.192
0.208
F
1.14
1.40
0.045
0.055
H(1)
6.10
6.71
0.240
0.264
J(1)
2.41
2.92
0.095
0.115
L
13.36
14.40
0.526
0.567
L(1)
3.33
4.04
0.131
0.159
ØP
3.53
3.94
0.139
0.155
Q
2.54
3.00
0.100
0.118
ECN: E21-0621-Rev. D, 04-Nov-2021
DWG: 6031
Note
• M* = 0.052 inches to 0.064 inches (dimension including protrusion), heatsink hole for HVM
Document Number: 66542
1
For technical questions, contact: hvm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Revison: 04-Nov-2021
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000