ESD205B102ELSE6327XTSA1

Protection Device TVS (Transient Voltage Suppressor) ESD205-B1 Series Bi-directional, 5.5 V, 5 pF, 0201, 0402, RoHS and Halogen Free compliant ESD205-B1-02ELS ESD205-B1-02EL Data Sheet Revision 1.4, 2014-05-14 Final Power Management & Multimarket Edition 2014-05-14 Published by Infineon Technologies AG 81726 Munich, Germany © 2014 Infineon Technologies AG All Rights Reserved. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com) Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. ESD205-B1 Series Product Overview 1 Product Overview 1.1 Features • • • • • • ESD / transient protection of signal lines in low voltage applications according to: – IEC61000-4-2 (ESD): ±20 kV (air / contact) – IEC61000-4-4 (EFT): ±2.5 kV / ±50 A (5/50 ns) – IEC61000-4-5 (Surge): ±2.5 A (8/20 μs) Bi-directional, working voltage up to VRWM = ±5.5 V Low capacitance: CL = 5 pF (typical) Low clamping voltage: VCL = +10 / -12 V (typical) at ITLP = 16 A Very low reverse current: IR < 1 nA (typical) Pb-free (RoHS compliant) and halogen free package 1.2 • • • Application Examples Keypad, touchpad, buttons, convenience keys LCD displays, Camera, audio lines, mobile communication, Consumer products (E-Book, MP3, DVD, DSC...) Notebooks tablets and desktop computers and their peripherals 1.3 Product Description Pin 1 marking (lasered) Pin 1 Pin 1 Pin 2 Pin 2 PinConf_and_SchematicDiag.vsd Figure 1-1 Pin Configuration and Schematic Diagram Table 1-1 Ordering Information Type Package Configuration Marking code ESD205-B1-02ELS TSSLP-2-3 1 line, bi-directional I ESD205-B1-02EL TSLP-2-19 1 line, bi-directional I Final Data Sheet 3 Revision 1.4, 2014-05-14 ESD205-B1 Series Maximum Ratings 2 Maximum Ratings Table 2-1 Maximum Ratings at TA = 25 °C, unless otherwise specified Parameter Symbol 1) Values Unit ESD air discharge ESD contact discharge1) VESD ±20 ±20 kV Peak pulse power2) PPK 30 W Peak pulse current2) IPP ±2.5 A Operating temperature range TOP -55 to 125 °C Storage temperature 1) VESD according to IEC61000-4-2 Tstg -65 to 150 °C 2) Non-repetitive current pulse 8/20µs exponential decay waveform according to IEC61000-4-5 Attention: Stresses above the max. values listed here may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Maximum ratings are absolute ratings; exceeding only one of these values may cause irreversible damage to the integrated circuit. 3 Electrical Characteristics at TA = 25 °C, unless otherwise specified   

   
       

  




    

  





  ( )!! 
%! )*
!
+! 
)#! 
 %  ##%#      !"!!""!" #$%"&!'!!  Figure 3-1 Definitions of electrical characteristics Final Data Sheet 4 Revision 1.4, 2014-05-14 ESD205-B1 Series Electrical Characteristics at TA = 25 °C, unless otherwise specified Table 3-1 DC Characteristics at TA = 25 °C, unless otherwise specified Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. Reverse working voltage VRWM -5.5 – 5.5 V Trigger voltage Vt1 6 – – V Holding voltage Vh 6 8 10 V IT = 1 mA Reverse current IR –