FCB070N65S3

FCB070N65S3 MOSFET – Power, N-Channel, SUPERFET) III, Easy Drive 650 V, 44 A, 70 mW www.onsemi.com Description SUPERFET III MOSFET is ON Semiconductor’s brand−new high voltage super−junction (SJ) MOSFET family that is utilizing charge balance technology for outstanding low on−resistance and lower gate charge performance. This advance technology is tailored to minimize conduction loss, provide superior switching performance, and withstand extreme dv/dt rate. Consequently, SUPERFET III MOSFET is very suitable for various AC/ DC power conversion for system miniaturization and higher efficiency. Features • • • • • • VDSS RDS(ON) MAX ID MAX 650 V 70 mW @ 10 V 44 A D G 700 V @ TJ = 150°C RDS(on) = 62 mW (Typ.) Ultra Low Gate Charge (Typ. Qg = 78 nC) Low Effective Output Capacitance (Typ. Coss(eff.) = 715 pF) 100% Avalanche Tested These Devices are Pb−Free and are RoHS Compliant S POWER MOSFET D G Applications S D2−PAK CASE 418AJ • Telecom / Server Power Supplies • Industrial Power Supplies • UPS / Solar MARKING DIAGRAM $Y&Z&3&K FCB 070N65S3 $Y &Z &3 &K FCB070N65S3 = ON Semiconductor Logo = Assembly Plant Code = Data Code (Year & Week) = Lot = Specific Device Code ORDERING INFORMATION See detailed ordering and shipping information on page 2 of this data sheet. © Semiconductor Components Industries, LLC, 2017 August, 2018 − Rev. 4 1 Publication Order Number: FCB070N65S3/D FCB070N65S3 ABSOLUTE MAXIMUM RATINGS (TC = 25°C, Unless otherwise specified) Symbol Parameter VDSS Drain to Source Voltage VGSS Gate to Source Voltage ID Drain Current Value Unit 650 V DC ±30 V AC (f > 1 Hz) ±30 V Continuous (TC = 25°C) 44 A Continuous (TC = 100°C) 28 IDM Drain Current 110 A EAS Single Pulsed Avalanche Energy (Note 2) 214 mJ IAS Avalanche Current (Note 1) 4.8 A EAR Repetitive Avalanche Energy (Note 1) 3.12 mJ dv/dt MOSFET dv/dt 100 V/ns Peak Diode Recovery dv/dt (Note 3) 20 PD TJ, TSTG TL Pulsed (Note 1) Power Dissipation (TC = 25°C) 312 W Derate Above 25°C 2.5 W/°C −55 to +150 °C 300 °C Operating and Storage Temperature Range Maximum Lead Temperature for Soldering, 1/8″ from Case for 5 s Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Repetitive rating: pulse-width limited by maximum junction temperature. 2. IAS = 4.8 A, RG = 25 W, starting TJ = 25°C. 3. ISD ≤ 44 A, di/dt ≤ 200 A/ms, VDD ≤ BVDSS, starting TJ = 25°C. THERMAL CHARACTERISTICS Symbol RqJC Parameter Value Unit Thermal Resistance, Junction to Case, Max. 0.4 _C/W Thermal Resistance, Junction to Ambient, Max. (Note 4) 40 4. Device on 1 in2 pad 2 oz copper pad on 1.5 x 1.5 in. board of FR−4 material. PACKAGE MARKING AND ORDERING INFORMATION Part Number Top Marking Package Reel Size Tape Width Shipping† FCB070N65S3 FCB070N65S3 D2−PAK 330 mm 24 mm 800 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. www.onsemi.com 2 FCB070N65S3 ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Parameter Symbol Test Conditions Min Typ Max Unit VGS = 0 V, ID = 1 mA, TJ = 25_C 650 − − V VGS = 0 V, ID = 1 mA, TJ = 150_C 700 − − V OFF CHARACTERISTICS BVDSS Drain to Source Breakdown Voltage DBVDSS/DTJ Breakdown Voltage Temperature Coefficient ID = 1 mA, Referenced to 25_C − 0.72 − V/_C IDSS Zero Gate Voltage Drain Current VDS = 650 V, VGS = 0 V − − 1 mA VDS = 520 V, VGS = 0 V, TC = 125_C − 2.2 − IGSS Gate to Body Leakage Current VGS = ±30 V, VDS = 0 V − − ±100 nA 2.5 − 4.5 V ON CHARACTERISTICS VGS(th) Gate Threshold Voltage VGS = VDS, ID = 1.0 mA RDS(on) Static Drain to Source On Resistance VGS = 10 V, ID = 22 A − 62 70 mW Forward Transconductance VDS = 20 V, ID = 22 A − 29 − S VDS = 400 V, VGS = 0 V, f = 1 MHz − 3090 − pF − 68 − pF gFS DYNAMIC CHARACTERISTICS Ciss Input Capacitance Coss Output Capacitance Coss(eff.) Effective Output Capacitance VDS = 0 V to 400 V, VGS = 0 V − 715 − pF Coss(er.) Energy Related Output Capacitance VDS = 0 V to 400 V, VGS = 0 V − 104 − pF Total Gate Charge at 10 V VDS = 400 V, ID = 22 A, VGS = 10 V (Note 5) − 78 − nC − 18 − nC Qg(tot) Qgs Gate to Source Gate Charge Qgd Gate to Drain “Miller” Charge ESR Equivalent Series Resistance − 30 − nC f = 1 MHz − 0.6 − W VDD = 400 V, ID = 22 A, VGS = 10 V, Rg = 4.7 W (Note 5) − 26 − ns − 52 − ns SWITCHING CHARACTERISTICS td(on) Turn-On Delay Time tr Turn-On Rise Time td(off) Turn-Off Delay Time − 89 − ns Turn-Off Fall Time − 16 − ns Maximum Continuous Source to Drain Diode Forward Current − − 44 A ISM Maximum Pulsed Source to Drain Diode Forward Current − − 110 A VSD Source to Drain Diode Forward Voltage VGS = 0 V, ISD = 22 A − − 1.2 V trr Reverse Recovery Time − 435 − ns Qrr Reverse Recovery Charge VGS = 0 V, ISD = 22 A, dIF/dt = 100 A/ms − 9.2 − mC tf SOURCE-DRAIN DIODE CHARACTERISTICS IS Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 5. Essentially independent of operating temperature typical characteristics. www.onsemi.com 3 FCB070N65S3 TYPICAL PERFORMANCE CHARACTERISTICS VGS = 10.0 V 8.0 V 7.0 V 6.5 V 6.0 V 5.5 V 10 1 0.3 VDS = 20 V 250 ms Pulse Test 100 ID, Drain Current (A) ID, Drain Current (A) 100 250 ms Pulse Test TC = 25°C 1 10 VDS, Drain−Source Voltage (V) 150°C 10 25°C −55°C 1 20 2 Figure 1. On−Region Characteristics 200 TC = 25°C 0.20 0.15 VGS = 10 V 0.10 VGS = 20 V 0.05 0.00 0 30 60 90 ID, Drain Current (A) 150°C 10 25°C 1 −55°C 0.1 0.0 120 VGS, Gate−Source Voltage (V) 10 Ciss 1000 Coss 100 10 1 0.1 0.1 VGS = 0 V f = 1 MHz Ciss = Cgs + Cgd (Cds = shorted) Coss = Cds + Cgd Crss = Cgd 1 10 100 VDS, Drain−Source Voltage (V) 1.2 1.5 0.3 0.6 0.9 VSD, Body Diode Forward Voltage (V) Figure 4. Body Diode Forward Voltage Variation vs. Source Current and Temperature 100000 Capacitances (pF) VGS = 0 V 250 ms Pulse Test 100 Figure 3. On−Resistance Variation vs. Drain Current and Gate Voltage 10000 7 Figure 2. Transfer Characteristics IS, Reverse Drain Current (A) RDS(ON), Drain−Source On−Resistance (W) 0.25 3 4 5 6 VGS, Gate−Source Voltage (V) Crss Figure 5. Capacitance Characteristics VDS = 130 V 8 VDS = 400 V 6 4 2 0 1000 ID = 22 A 0 40 60 80 20 Qg, Total Gate Charge (nC) 100 Figure 6. Gate Charge Characteristics www.onsemi.com 4 FCB070N65S3 TYPICAL PERFORMANCE CHARACTERISTICS (Continued) 3.0 VGS = 0 V ID = 1 mA RDS(on), Drain−Source On−Resistance (Normalized) BVDSS, Drain−Source Breakdown Voltage (Normalized) 1.2 1.1 1.0 0.9 0.8 −50 2.5 2.0 1.5 1.0 0.5 0.0 50 100 150 0 TJ, Junction Temperature (5C) 100 ms 1 ms 10 40 ID, Drain Current (A) ID, Drain Current (A) 30 ms 10 ms DC 1 Operation in this Area is Limited by RDS(on) TC = 25°C TJ = 150°C Single Pulse 0.1 1 10 100 VDS, Drain−Source Voltage (V) 20 10 50 75 100 125 TC, Case Temperature (5C) 150 Figure 10. Maximum Drain Current vs. Case Temperature 20 16 12 8 4 0 30 0 25 1000 Figure 9. Maximum Safe Operating Area EOSS, (mJ) 0 50 100 150 TJ, Junction Temperature (5C) 50 200 100 0 −50 Figure 8. On−Resistance Variation vs. Temperature Figure 7. Breakdown Voltage Variation vs. Temperature 0.01 VGS = 10 V ID = 22 A 100 200 300 400 500 600 650 VDS, Drain to Source Voltage (V) Figure 11. EOSS vs. Drain to Source Voltage www.onsemi.com 5 FCB070N65S3 r(t), Normalized Effective Transient Thermal Resistance TYPICAL PERFORMANCE CHARACTERISTICS (Continued) 2 1 0.1 DUTY CYCLE − DESCENDING ORDER D = 0.5 0.2 0.1 0.05 0.02 0.01 PDM t1 0.01 0.001 −5 10 SINGLE PULSE −4 10 t2 ZqJC(t) = r(t) x RqJC RqJC = 0.4°C/W Peak TJ = PDM x ZqJC(t) + TC Duty Cycle, D = t1 / t2 −3 −2 −1 10 10 10 t, Rectangular Pulse Duration (sec) Figure 12. Transient Thermal Response Curve www.onsemi.com 6 0 10 1 10 FCB070N65S3 VGS RL Qg VDS VGS Qgs Qgd DUT IG = Const. Charge Figure 13. Gate Charge Test Circuit & Waveform RL VDS VDS 90% 90% 90% VDD VGS RG VGS DUT VGS 10% td(on) 10% tr td(off) ton tf toff Figure 14. Resistive Switching Test Circuit & Waveforms L E AS + 1 @ LI AS 2 VDS BVDSS ID IAS RG VDD DUT VGS 2 ID(t) VDD VDS(t) tp tp Figure 15. Unclamped Inductive Switching Test Circuit & Waveforms www.onsemi.com 7 Time FCB070N65S3 + DUT VDS − ISD L Driver RG Same Type as DUT VGS − dv/dt controlled by RG − ISD controlled by pulse period D+ VGS (Driver) VDD Gate Pulse Width Gate Pulse Period 10 V IFM, Body Diode Forward Current ISD (DUT) di/dt IRM Body Diode Reverse Current Body Diode Recovery dv/dt VDS (DUT) VDD VSD Body Diode Forward Voltage Drop Figure 16. Peak Diode Recovery dv/dt Test Circuit & Waveforms SUPERFET is a registered trademark of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. www.onsemi.com 8 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS D2PAK−3 (TO−263, 3−LEAD) CASE 418AJ ISSUE E SCALE 1:1 GENERIC MARKING DIAGRAMS* XX XXXXXXXXX AWLYWWG IC DOCUMENT NUMBER: DESCRIPTION: XXXXXXXXG AYWW Standard 98AON56370E AYWW XXXXXXXXG AKA Rectifier XXXXXX XXYMW SSG DATE 25 OCT 2019 XXXXXX = Specific Device Code A = Assembly Location WL = Wafer Lot Y = Year WW = Work Week W = Week Code (SSG) M = Month Code (SSG) G = Pb−Free Package AKA = Polarity Indicator *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “ G”, may or may not be present. Some products may not follow the Generic Marking. Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. D2PAK−3 (TO−263, 3−LEAD) PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2018 www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 www.onsemi.com 1 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative